Test Leads

Amprobe

TEST LEADS,ALLIGATOR CLIPS,HD DMMS, CAT IV 1000V

TL1500 Heavy Duty Test Lead, 1.5 kV AC, 250 mm OAL

MFR: Fluke

MFR #: TL1500

UPC: 095969362467

Item #: 154689

Amprobe

ACD-23SW True RMS Clamp-On Meter, 40 to 400 A, 4 to 600 V AC/DC, 400 mV DC, 400 Ohm/4 to 400 kOhm/4 to 40 MOhm, 50 to 500 Hz, 1.18 in Jaw, 3-3/4 Digits LCD Display

MFR: Fluke

MFR #: ACD-23SW

UPC: 095969563529

Item #: 197379

Fluke

Is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 40,000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance. The probe is a precision 1000:1 voltage divider formed by two matched resistors. The unusually high input impedance offered by these resistors minimizes circuit loading and thereby, optimizes measurement accuracy.

80K-40 High Voltage Current Probe, 40 kV AC/DC, 28 VRMs, CAT I, 12.99 in L

MFR: Fluke

MFR #: 80K-40

UPC: 095969001120

Item #: 139500

Fluke

Current probe is based on Hall Effect technology for use in measurement of both DC and AC current. May be used in conjunction with oscilloscopes and other suitable recording instruments for accurate non-intrusive current measurement.

I310S Current Probe, 30/300 A/300 V AC/DC, 20 kHz

MFR: Fluke

MFR #: I310S

UPC: 095969401241

Item #: 447702

Fluke

FLUKE-365 Detachable Jaw Clamp Meter, 200 A, 600 V AC/DC, 6000 Ohm, Backlit Display

MFR: Fluke

MFR #: FLUKE-365

UPC: 095969544788

Item #: 204170

Fluke

FLUKE-772 Milliamp mA Process Clamp Loop Meter

MFR: Fluke

MFR #: FLUKE-772

UPC: 095969475815

Item #: 232490

Fluke

TP38 Slim Reach Insulated Test Probe Set, 600/1000 V AC, 10 A, CAT II 1000 V/CAT III 600 V, 8.9 in L

MFR: Fluke

MFR #: TP38

UPC: 095969078771

Item #: 148524

Rittal Corp

9340280 Connection Pin, For OM Adaptor/Support, For Use With OM Adapter/Support, Insert Strip 9340.290, Polyamide (PA 6), RAL5010

MFR: Rittal

MFR #: 9340280

UPC: 639889830004

Item #: 505920

Telemecanique

jumper cable - male M12 - 4-pin straight - female M12 - 4-pin straight - cable2m

XZCR1511041C2 Jumper Cable, 250 V AC/300 V DC, (4) 0.34 sq-mm, 2 m L

MFR: Telemecanique Sensors

MFR #: XZCR1511041C2

UPC: 785901756460

Item #: 498296

Amprobe

Test Lead, Included: Shrouded 90 DEG Banana Plugs, One Red And One Black Leads And Clips, CE Certified

TL35B Test Lead, 40 in OAL, PVC

MFR: Fluke

MFR #: TL35B

UPC: 095969425124

Item #: 216815

Fluke

FLUKE-I2500-18 iFlex Current Probe, 600/1000 V AC, 2500 A, CAT III 1000 V AC, CAT IV 600 V AC, 18 in L

MFR: Fluke

MFR #: FLUKE-I2500-18

UPC: 095969559690

Item #: 12344

Fluke

I200S AC Small Sized Current Clamp, 20/200 A/600 V AC, 40 Hz to 10 kHz

MFR: Fluke

MFR #: I200S

UPC: 095969063944

Item #: 42684

Greenlee

39 IN (1 m) long flexible silicon insulated wire. Right-angle meter plugs. Comfort-grip over molded probes. Gold plated tips for low contact resistance. Set of 2 leads, one black, one red. Measurement Category IV, 1000V per UL-61010. Maximum current 10 amps. Lifetime Limited Warranty.

TSG-3 SureGrip Insulated Test Lead, 1 kV AC, 10 A, 39 in OAL, Silicone, Gold Plated

MFR: Greenlee

MFR #: TSG-3

UPC: 783310120346

Item #: 176314

Greenlee

CLM-CLIPS Test Lead Kelvin Clip

MFR: Greenlee

MFR #: CLM-CLIPS

UPC: 783310027225

Item #: 684779

Discontinued

Fluke

STL120-III Shielded Test Lead Set, For Use With ScopeMeter 120 Series Handheld Oscilloscopes, Silicone, Gray/Red

MFR: Fluke

MFR #: STL120-III

UPC: 095969601085

Item #: 267799

Discontinued

Fluke

Extended Fine Point Tip Adapter Set, Model: 8845A, Voltage Rating: 300 VRMS/VDC, Amperage Rating: 3 AMP, Diameter: Tip: 0.08 IN Outer, Tip Material: Stainless Steel, Nickel Plated Body, Polypropylene Insulated, UL94 V-2 Fire Retardant, Color: One Red And One Black, IEC 1010-2-0331, Category II, P2 Compliant

MFR: Fluke

MFR #: 8845A-EFPT

UPC: 095969370547

Item #: 384299

Categories

Filters

TL1500 Heavy Duty Test Lead, 1.5 kV AC, 250 mm OAL

ACD-23SW True RMS Clamp-On Meter, 40 to 400 A, 4 to 600 V AC/DC, 400 mV DC, 400 Ohm/4 to 400 kOhm/4 to 40 MOhm, 50 to 500 Hz, 1.18 in Jaw, 3-3/4 Digits LCD Display

80K-40 High Voltage Current Probe, 40 kV AC/DC, 28 VRMs, CAT I, 12.99 in L

I310S Current Probe, 30/300 A/300 V AC/DC, 20 kHz

FLUKE-365 Detachable Jaw Clamp Meter, 200 A, 600 V AC/DC, 6000 Ohm, Backlit Display

FLUKE-772 Milliamp mA Process Clamp Loop Meter

TP38 Slim Reach Insulated Test Probe Set, 600/1000 V AC, 10 A, CAT II 1000 V/CAT III 600 V, 8.9 in L

9340280 Connection Pin, For OM Adaptor/Support, For Use With OM Adapter/Support, Insert Strip 9340.290, Polyamide (PA 6), RAL5010

XZCR1511041C2 Jumper Cable, 250 V AC/300 V DC, (4) 0.34 sq-mm, 2 m L

TL35B Test Lead, 40 in OAL, PVC

FLUKE-I2500-18 iFlex Current Probe, 600/1000 V AC, 2500 A, CAT III 1000 V AC, CAT IV 600 V AC, 18 in L

I200S AC Small Sized Current Clamp, 20/200 A/600 V AC, 40 Hz to 10 kHz

TSG-3 SureGrip Insulated Test Lead, 1 kV AC, 10 A, 39 in OAL, Silicone, Gold Plated

CLM-CLIPS Test Lead Kelvin Clip

STL120-III Shielded Test Lead Set, For Use With ScopeMeter 120 Series Handheld Oscilloscopes, Silicone, Gray/Red