Skip to Main Content Skip to Footer Content

Main Content Starts Here

Test Leads

filter_alt Filters

Showing 1 - 48 of 66 Items

Sort By

Per Page

Brand

Ways to Shop

Brand

Ways to Shop

Fluke

Hard Point Test Lead Set

TL75 SureGrip Test Lead Set, 2 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TL75

UPC: 095969011587

Item #: 15084

Fluke

Designed for electrical and electronics test in todays industrial environment

TLK289 SureGrip Industrial Master Test Lead Set, 13 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TLK289

UPC: 095969417860

Item #: 126795

Fluke

Slim reach test probes for your Fluke tool.

TP1 Slim Reach Test Probes

MFR: Fluke

MFR #: TP1

UPC: 095969057691

Item #: 122135

Fluke

Twist. Test. TwistGuard Test Leads with adjustable length test tips. Test leads as tough as your meter.

TL175 TwistGuard 2-Piece Test Lead Set, 600/1000 V AC, 10 A

MFR: Fluke

MFR #: TL175

UPC: 095969521543

Item #: 187364

Fluke

Remote Control Probe

TP165X Remote Control Probe with Test Button

MFR: Fluke

MFR #: TP165X

UPC: 095969245944

Item #: 181980

Fluke

Test Probe Adapter Set

TP920 Test Probe Adapter Set

MFR: Fluke

MFR #: TP920

UPC: 095969106900

Item #: 49849

Fluke

TP175 TwistGuard Test Probes, 1000V, 10 Amp

TP175 TwistGuard Test Probes, 1000V, 10 Amp

MFR: Fluke

MFR #: TP175

UPC: 095969521550

Item #: 354799

Ideal

Standard Test Lead, Voltage Rating: 600 V, UL Listed, CSA Certified, CAT III, For 61-076 Vol-Con Continuity Tester

61-070 Standard Test Lead, 600 V AC, 10-1/2 in OAL, Vinyl

MFR: Ideal Industries

MFR #: 61-070

UPC: 783250610709

Item #: 1711

Fluke

Milliamp process clamp meters can measure mA signals without breaking the loop. The Fluke 773 mA Clamp Meter is Flukes premier mA Clamp Meter, providing you with the best in troubleshooting and process calibration power. Need more hours in your day. Save time by NOT breaking the loop on 4-20 mA signal measurements. Are you spending time: Taking mA measurements by removing a wire and breaking the loop Calling the control room to isolate a loop Testing analog input/output on a console Troubleshooting devices with mA inputs and outputs Repairing intermittent or erratic 4-20 mA loops Going back to the shop to get extra tools. If you need more time in your busy day take a good look at the Fluke 773 mA Clamp Meters. Its designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

FLUKE-773 Milliamp mA Process Clamp Meter

MFR: Fluke

MFR #: FLUKE-773

UPC: 095969475822

Item #: 192136

Klein Tools

Circuit Breaker Finder Accessory Kit

69411 Finder Accessory Kit, For Use With ET300 Digital Circuit Breaker Finder, Analog Display, Alkaline Battery Power

MFR: Klein Tools

MFR #: 69411

UPC: 092644694110

Item #: 198882

Klein Tools

Replacement Test Lead Set, Right Angle, Standard banana-type inputs compatible with most multimeters and clamp meters

69410 Right Angle Replacement Test Lead Set, For Use With MM1000, MM2000, CL1000, CL2000, CL3100, MM100, MM200, CL100, CL200 and CL3000 Multimeter and Clamp Meter

MFR: Klein Tools

MFR #: 69410

UPC: 092644694103

Item #: 257523

Fluke

SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair of industrial test probes (red, black). Sharp, 12 mm stainless stell tip provides reliable contact. Flexible finger barrier improves grip. Recommended for use with TL222 and TL224 test leads. CAT II 1000 V, 10 A rating, UL Listed

TP220 SureGrip Industrial Test Probes

MFR: Fluke

MFR #: TP220

UPC: 095969133203

Item #: 15656

Fluke

Slim Reach Test Probes, 2mm diameter hard stainless steel probe tips

TP2 2mm Slim Reach Test Probes

MFR: Fluke

MFR #: TP2

UPC: 095969057707

Item #: 168028

Fluke

Test Lead Set, Included: One Pair (Red, Black) 1.5 MR Long Silicone Test Leads With Right Angle Shrouded Banana Plug, Lantern Tip (Removable) For Use With European Wall Sockets (4 MM), Lantern Tip Can Be Removed For Easy Access To Terminal Blocks (2 MM), 10 AMP Maximum Current, CAT II 1000 V, CAT III 1000 V And CAT IV 600 V Rated, For Use With GS38 T120 Voltage And Continuity Tester

TL76 All-in-One Test Lead Set, For Use With GS38 T120 Voltage and Continuity Tester

MFR: Fluke

MFR #: TL76

UPC: 095969207607

Item #: 541299

Fluke

Deluxe Electronic Test Lead Kit

TL81A Deluxe Electronic Test Lead Kit, For Use With Electrical Tester

MFR: Fluke

MFR #: TL81A

UPC: 095969079549

Item #: 111660

Fluke

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools

I1010 AC/DC Current Clamp

MFR: Fluke

MFR #: I1010

UPC: 095969048200

Item #: 137374

Fluke

Automotive Back Probe Pin Set, Voltage Rating: 60 VDC, For Use With Fluke TLK282 SureGrip Deluxe Automotive Test Lead Kit

TP40 Automotive Back Probe Pin Set, For Use With TLK282 SureGrip Deluxee Automotive Test Lead Kit, 60 V AC

MFR: Fluke

MFR #: TP40

UPC: 095969087513

Item #: 280434

Fluke

Electronics Master Test Lead Set, Included: Precision Electronic Probes, Micro-Grabbers And Leads, Mini-Alligator Clips, Grabbers, And Probes

TLK287 Electronics Master Test Lead Set, For Use With Any Multimeter, Clamp Meter or Test Instrument that Accepts a Standard Shrouded Banana Plug, Black/Red/Yellow

MFR: Fluke

MFR #: TLK287

UPC: 095969417853

Item #: 122527

Fluke

Fluke Current Clamps are the ideal tools to extend the current ranges of Multimeters. Is a single range 200A ac current clamp with current output via safety shrouded banana plugs. Is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

I200 Clamp-On AC Current Probe, 600 V AC, 200 A, 0.5 to 240 A Measuring Range, 0.8 in Jaw

MFR: Fluke

MFR #: I200

UPC: 095969063937

Item #: 144584

Fluke

Handy all-in-one kit includes AC220 SureGrip Alligator Clip Set, TP1 Slim-Reach Test Probes (flat bladed), and TL224 SureGrip Silicone Test Lead Set (straight to right)

TL223 SureGrip All-in-One Electrical Test Lead Set, 6 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TL223

UPC: 095969206464

Item #: 81945

Fluke

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

I410 Current Clamp, 400 A, 3 kHz, Digital Display

MFR: Fluke

MFR #: I410

UPC: 095969048194

Item #: 180582

Fluke

SureGrip Master Accessory Set that includes leads and probes in a handy roll-up pouch

TLK-225 SureGrip Industrial Master Test Lead Set, 13 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TLK-225

UPC: 095969241878

Item #: 13527

Fluke

Basic Electronic Test Lead Set

TL80A Basic Electronic Test Lead Set, 9 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TL80A

UPC: 095969077309

Item #: 239263

Fluke

Electronic Test Probe, Length: Upto 100 MM Probe Tip, 1 MR Test Lead, CAT II 1000 V Rated

TL910 Electronic Test Probe, 1 kV AC, 3 A, CAT II 1000 V

MFR: Fluke

MFR #: TL910

UPC: 095969106887

Item #: 329093

Fluke

Replacement Test Leads For Fluke T5-1000 or T5-600 Voltage, Continuity and Current Testers

T5-RLS Replacement Test Lead Set, 1 Pieces, For Use With T5-600 and T5-1000 Electrical Testers

MFR: Fluke

MFR #: T5-RLS

UPC: 095969609791

Item #: 260338

Fluke

Output Cable Length: 1.5 m Maximum Conductor Size: 32 mm Storage Temperature: -20 degrees Celsius to 60 degrees Celsius Operating Temperature: 0 degrees Celsius to 50 degrees Celsius Relative Humidity: 10 degrees Celsius to 30 degrees Celsius: 95 percent 30 degrees Celsius to 40 degrees Celsius: 75 percent 40 degrees Celsius to 50 degrees Celsius: 45 percent Temperature Coefficient: 0.01 X (specified accuracy)/ degrees Celsius (< 18 degrees Celsius or > 28 degrees Celsius) Altitude: Operating: 2000 m Non-operating: 12000 m Dimensions: 150 x 70 x 30 mm Weight: 114 g

I400 AC Current Clamp

MFR: Fluke

MFR #: I400

UPC: 095969268608

Item #: 4685

Fluke

SureGrip Insulated Test Leads

TL224 SureGrip Insulated Test Lead Set, 2 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TL224

UPC: 095969103442

Item #: 98437

Fluke

Rigid Back Probe Pin Set, Voltage Rating: 60 VDC, Length: Tip: 2 IN, Color: One Red And One Black, For Use On 2 MM OD Probe Tips

TP88 Rigid Back Test Probe Set, 60 V DC, 0.125 A, 2 in L

MFR: Fluke

MFR #: TP88

UPC: 095969261289

Item #: 510684

Fluke

Handy all-in-one kit includes AC220 SureGrip Alligator Clip Set, TP220 SureGrip Industrial Test Probe Set, and TL224 SureGrip Silicone Test Lead Set (straight to right)

TL220 SureGrip All-In-One Industrial Test Lead Set, 6 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TL220

UPC: 095969206457

Item #: 15642

Fluke

Premium test lead set for Fluke products.

TL71 Premium Test Lead Set, 2 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TL71

UPC: 095969077293

Item #: 125137

Fluke

TwistGuard Test Probe With 4 MM Adapter, Voltage Rating: 1000 V, Amperage Rating: 10 AMP, Diameter: Tip: 2 MM, Color: Red And Black Insulator, UL Listed, Conforms To EN61010-031, CAT II 1000 V, CAT III 1000 V, CAT IV 600 V Rated, For Use With The TL22X Series, TL238 And TL27 Test Leads And Multimeters

TP175E TwistGuard Test Probe With 4 MM Adapter Electronic Measuring Probe, 10 A, 1 kV

MFR: Fluke

MFR #: TP175E

UPC: 095969528894

Item #: 391873

Ideal

Test Lead, For 61-521 3-Phase/Motor Rotation Tester

Test Lead, For 61-521 3-Phase/Motor Rotation Tester

MFR: Ideal Industries

MFR #: TL-521

UPC: 783250567607

Item #: 443315

Fluke

TwistGuard Test Lead Set, Included: Removable 4 MM Lantern Tips That Thread Onto The Lead Tip, 10 AMP Maximum Current, Operating Temperature: -20 To 55 DEG C, CAT II 1000 V, CAT III 1000 V And CAT IV 600 V Rated, Conforms To EN61010-031

TL175E TwistGuard Test Lead Set, Silicone, Black/Red

MFR: Fluke

MFR #: TL175E

UPC: 095969528887

Item #: 539940

Fluke

No Image Available

TRM50 Audio/Video BNC Adapter, Black

MFR: Fluke

MFR #: TRM50

UPC: 095969601948

Item #: 742330

Fluke

Banana Voltage Lead Set, 4 Number Of Phase, For Fluke 1735/45 Power Logger

VL1735/45 4-Phase Banana Voltage Lead Set, For Use With 1735/45 Power Logger

MFR: Fluke

MFR #: VL1735/45

UPC: 095969460514

Item #: 679316

Fluke

LED Probe Light, Battery: (2) 3 V, 120 HR Life

L200 LED Probe Light, For Use With Test Probe, (2) 3 V AC, 120 hr Life, Yellow

MFR: Fluke

MFR #: L200

UPC: 095969241663

Item #: 16601

Fluke

Slim Reach Test Probes, 4mm diameter hard stainless steel probe tips

TP4 Slim Reach Test Probe, 1 kV AC, 10 A, CAT II 1000 V/10 A, 8.9 in L

MFR: Fluke

MFR #: TP4

UPC: 095969057714

Item #: 148567

Fluke

Is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.

80I-110S AC/DC Current Clamp, 300/600 V AC, 10/100 A, CAT II 600 V/CAT III 300 V, 12.99 in L

MFR: Fluke

MFR #: 80I-110S

UPC: 095969040549

Item #: 73332

Fluke

60 in. 5-Way Test Lead Set with 5 easy to connect

TL26A Test Leads Test Lead

MFR: Fluke

MFR #: TL26A

UPC: 095969083546

Item #: 244579

Fluke

An accessory kit specially designed for working in high-energy environments. The SureGrip Test Probe has only 4 mm of exposed metal at the tip. Test probes with less exposed metal help reduce the risk of inadvertent shorts between each other and other metal surfaces that could result in an arc flash explosion. Probe extenders fit between modular test leads and test probes, increasing the distance between you and a live circuit by 20.5 cm (8).

TL238 SureGrip 8-Piece Test Lead Set, 600/1000 V AC, 10 A, 59 in OAL

MFR: Fluke

MFR #: TL238

UPC: 095969255417

Item #: 1407

Fluke

SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of silicone insulated leads with straingth connectors on both ends. Reinforced strain relief, extends test leads by 1.5m. Includes one pair (red, black) of femail couplers. 600 V CAT IV, 1000 V CAT III, 10 A rating, UL Listed

TL221 SureGrip Test Lead Extension Set, 4 Pieces, For Use With Any Multimeter, Clamp Meter or Test Instrument that Accepts a Standard Shrouded Banana Plug, Silicone, Black/Red

MFR: Fluke

MFR #: TL221

UPC: 095969206433

Item #: 104356

Fluke

Complete set of test and measurement accessories designed especially for automotive specialists. Use the sharp stainless steel probes to contact the wire conductor or pinpoint tests on a circuit or relay, and the large jaw alligator clips to get a good gr

TLK281 SureGrip Automotive Test Lead Kit, 11 Pieces, For Use With Any Multimeter, Clamp Meter or Test Instrument that Accepts a Standard Shrouded Banana Plug

MFR: Fluke

MFR #: TLK281

UPC: 095969261500

Item #: 63825

Fluke

Heavy Duty Test Lead Set comes with 2 pieces with safety shrouded banana plugs and extend measurement capabilities. CAT III 1000 V, 10 Amp rating, UL Listed

TL27 Test Leads Test Lead

MFR: Fluke

MFR #: TL27

UPC: 095969076739

Item #: 197094

Fluke

Everything you can find in the TLK281 Automotive Test Lead Kit, plus a few extras. Use the back probe pins to slide into weather pack connectors on fuel injectors, TPS and MAP sensors. A hook probe with plunger actuation allows quick connection to pins or

TLK282 SureGrip Deluxee Automotive Test Lead Kit, 17 Pieces, Black/Red

MFR: Fluke

MFR #: TLK282

UPC: 095969261517

Item #: 521110

Fluke

Heavy Duty Bus Bar Clip Set

AC87 Bus Bar Clip Set Test Lead

MFR: Fluke

MFR #: AC87

UPC: 095969077323

Item #: 159370

Fluke

Mini-Hook Test Leads 4 mm banana plugs and mini hooks that extend measurement capabilities and are multi-stacking.

TL940 2-Piece Mini-Hook Multi-Stacking Test Lead Set, 30 V AC/60 V DC, 3 A, 36 in OAL

MFR: Fluke

MFR #: TL940

UPC: 095969106955

Item #: 8558

Fluke

Special value SureGrip Set for industrial applications. Includes two sizes of alligator clips and sharp test probes for reliable connections, test leads and a roomy carry case to hold and protect your meter and all your accessories.

TLK-220 SureGrip Industrial Test Lead Set, 8 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TLK-220

UPC: 095969241854

Item #: 13511

Fluke

Retractable Tip Test Lead Set with extra hard probe tips to provide long service lif and a flixible silicone insulated test lead. Contains one pair (red, black) of test leads with sharp needle point tips adjustable to desired length from 0 to 76mm.

TL40 4-Piece Retractable Tip Test Lead Set, 600 V AC, 3 A, 48 in OAL

MFR: Fluke

MFR #: TL40

UPC: 095969096188

Item #: 276333