Power Tool Attachments | Stoneway Electric Supply Company

Greenlee

Combination Drill/Tap Bits. 12-24NC. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

DTAP12-24 Quick-Change Standard Length Combination Drill and Tap, 2B Class of Fit, 1-1/4 in L Drill, #12-24 NC Thread

MFR: Greenlee

MFR #: DTAP12-24

UPC: 783310176152

Item #: 47111

Greenlee

Nail Eater Extreme Shorty Wood Boring Auger Bit; 3/4 Inch, 7-5/8 Inch OAL, 5 Inch Flute

62PTS-3/4 Extreme Short Drill Bit, 3/4 in Dia, 7-5/8 in OAL, 7/16 in Shank

MFR: Greenlee

MFR #: 62PTS-3/4

UPC: 783310317920

Item #: 84577

Greenlee

Ultra Cutter 1-3/4" (44.4 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

925-1-3/4 Ultra Hole Saw With Fixed Pockets, 1-3/4 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor

MFR: Greenlee

MFR #: 925-1-3/4

UPC: 783310101604

Item #: 11457

Milwaukee

60PC Shockwave Packout Set

MFR: Milwaukee Electric Tool

MFR #: 48-32-5162

UPC: 045242269013

Item #: 792743

Greenlee

Quick change arbor allows you to change cutter heads with a simple push and a turn use the same arbor for different size cutting heads.

645-022 Quick Change Hole Saw Arbor, 1/2 in Shank

MFR: Greenlee

MFR #: 645-022

UPC: 783310057536

Item #: 132793

Greenlee

Large Arbor with Pilot Drill for 1-3/8 to 2-1/2 Size Cutter

925-022 Large Hole Saw Arbor With Pilot Drill, 3/8 in Arbor, 3/8 in Shank, 1/4 in Dia x 1-1/2 in L Pilot Drill, HSS

MFR: Greenlee

MFR #: 925-022

UPC: 783310101857

Item #: 11505

Greenlee

34AR-6 Self-Feeding Spade Bit Kit, 3/8 in Min Drill Bit, 1 in Max Drill Bit, 6 Pieces, For Use With 1/4 in or Larger Power Drill, Steel

MFR: Greenlee

MFR #: 34AR-6

UPC: 783310037101

Item #: 91116

Greenlee

Carbide-Tipped Hole Cutter Kit. Contains 7/8", 1-1/8" and 1-3/8" cutter heads, pilot drill, hex key and case. Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.

635 Hole Cutter Kit, 5 Pieces, Carbide Tip

MFR: Greenlee

MFR #: 635

UPC: 783310035992

Item #: 62175

Greenlee

Large Split-Point Pilot Drill Prevents Walking. Makes Accurate Hole Placement Easy.

925-002 Large Pilot Drill Bit, 3/8 in Shank, 1/4 in Pilot Drill, HSS

MFR: Greenlee

MFR #: 925-002

UPC: 783310102113

Item #: 11584

Greenlee

Nail Eater Extreme Shorty Wood Boring Auger Bit; 7/8 Inch, 7-5/8 Inch OAL, 5 Inch Flute

62PTS-7/8 Extreme Short Drill Bit, 7/8 in Dia, 7-5/8 in OAL, 7/16 in Shank

MFR: Greenlee

MFR #: 62PTS-7/8

UPC: 783310317968

Item #: 84597

Greenlee

Small Split-Point Pilot Drill Prevents Walking. Makes Accurate Hole Placement Easy.

925-001 Small Pilot Drill Bit, 3/8 in Shank, 3/16 in Pilot Drill, HSS

MFR: Greenlee

MFR #: 925-001

UPC: 783310101864

Item #: 11525

Greenlee

Ultra Cutter 1-3/8" (35 mm) actual hole size. Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

925-1-3/8 Ultra Hole Saw With Fixed Pockets, 1-3/8 in Dia, 1/4 in D Cutting, HSS Cutting Edge, 1/2 in Arbor

MFR: Greenlee

MFR #: 925-1-3/8

UPC: 783310101598

Item #: 11443

Greenlee

Nail Eater Extreme 7/8" (22.2 mm) hole diameter. 18" (457.2 mm)overall length. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s.

66PT-7/8 Extreme Drill Bit, 7/8 in Dia, 18 in OAL, 7/16 in Shank

MFR: Greenlee

MFR #: 66PT-7/8

UPC: 783310309277

Item #: 174233

Greenlee

353-969 Tapered Reciprocating Saw Blade, 9 in L x 7/8 in W, 8/10, Bi-Metal Body

MFR: Greenlee

MFR #: 353-969

UPC: 783310099901

Item #: 235139

Greenlee

353-818 Straight Reciprocating Saw Blade, 8 in L x 3/4 in W, 18, Bi-Metal Body

MFR: Greenlee

MFR #: 353-818

UPC: 783310099765

Item #: 39460

Milwaukee

1pk 9" 10TPI Nitrus Torch for MM

MFR: Milwaukee Electric Tool

MFR #: 48-00-6252

UPC: 045242854653

Item #: 781713

Milwaukee

38Pc Sae Tap & Die Packout

MFR: Milwaukee Electric Tool

MFR #: 49-22-5604

UPC: 045242779376

Item #: 775440

Greenlee

38524 Hole Saw Arbor, 5/16 in Hex Shank, 1/4 in Pilot Drill, HSS

MFR: Greenlee

MFR #: 38524

UPC: 783310385240

Item #: 235140

Greenlee

2" Conduit Size Knockout Die. Optimized for widest range of materials and drivers. Alignment markings for improved accuracy. Laser markings for quick part identification. Made in USA

KD-2 Round Knockout Die, 2 in Conduit/Pipe

MFR: Greenlee

MFR #: KD-2

UPC: 783310090557

Item #: 787882

Greenlee

333-1224 Hacksaw Blade, 12 in L Blade, Bi-Metal Blade, 24

MFR: Greenlee

MFR #: 333-1224

UPC: 783310100386

Item #: 63249

Greenlee

34403 Kwik Stepper Multi-Hole Step Bit, 3/16 in Dia Min Hole, 7/8 in Dia Max Hole, 11 Steps, Steel, 12 Hole Sizes, 3/8 in Shank

MFR: Greenlee

MFR #: 34403

UPC: 783310344032

Item #: 105572

Greenlee

34401C 1/2 inch Cobalt Metal Cutting Step Bit #1

MFR: Greenlee

MFR #: 34401C

UPC: 783310057895

Item #: 426026

Greenlee

Quick Change Carbide Tipped Hole Cutter 5/8" (15.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

645-5/8 Quick-Change Hole Cutter, 5/8 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 645-5/8

UPC: 783310056911

Item #: 129350

Greenlee

34403C 7/8 inch Cobalt Metal Cutting Step Bit #3

MFR: Greenlee

MFR #: 34403C

UPC: 783310057901

Item #: 426027

Greenlee

Quick Change D'VersiBIT Extension System Kit. 2.25' x 5" x 39.5" (57.1mm x 127mm x 1003.3mm). All the same great features as a traditional flexible drill bit , but with even more flexibility and versatility. For use when drilling between studs and joists. Can use with any type of bit with a 1/4" quick change hex on it, such as spade bits, auger bits or drill bits for increased application flexibility. Replace only the bit as it wars rather than the entire bit and shaft for lower overall cost of ownership. Quickly and easily switch from drilling to pulling with the quick change pulling grip.

921-36 DVersiBIT Quick-Change Bit Extension, 36 in OAL

MFR: Greenlee

MFR #: 921-36

UPC: 783310124153

Item #: 178711

Greenlee

5/8" (15.9) hole diameterBore hardwood, softwood, plywood and drywall. Innovative self-feeding design requires less effort and reduces vibration. Unique tapered design allows existing hole enlargement. 1/4" Quick change hex shank. Forged and heat treated for long life. For use in 1/4" (6.4 mm) or larger power drills. Hole in top center of bit for wire pulling. P.O.P. Packaged.

34A-5/8 Self-Feed Spade Wood Drill Bit, 5/8 in Dia, 6-1/4 in OAL, 1/4 in Shank

MFR: Greenlee

MFR #: 34A-5/8

UPC: 783310037132

Item #: 235137

Greenlee

Combination Drill/Tap Bits. M4 x .70. Complete hole drilling, tapping and deburring/countersinking in one operation with power drill saves labor and time. Back tapered beyond tap to prevent thread damage from over-drilling. Deburr/countersink also provided on bit beyond back taper. Made from hardened high-speed steel vs. carbon steel for longer life. High quality hex shank to ensure strong connection to drill chuck. Designed to tap up to 10-gauge metal. Quick change adaptor included in both metric and standard kits.

DTAPM4C Quick-Change Standard Length Combination Drill and Tap, 1 in L Drill, M4x0.7 Thread

MFR: Greenlee

MFR #: DTAPM4C

UPC: 783310121619

Item #: 214248

Greenlee

Nail Eater Extreme 1-1/8" (28.6 mm) hole diameter. 18" (457.2 mm)overall length. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s.

66PT-1-1/8 Extreme Drill Bit, 1-1/8 in Dia, 18 in OAL, 7/16 in Shank

MFR: Greenlee

MFR #: 66PT-1-1/8

UPC: 783310309352

Item #: 174257

Greenlee

Nail Eater Extreme 1-1/4" (31.8 mm) hole diameter. 18" (457.2 mm)overall length. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s.

66PT-1-1/4 Extreme Drill Bit, 1-1/4 in Dia, 18 in OAL, 7/16 in Shank

MFR: Greenlee

MFR #: 66PT-1-1/4

UPC: 783310309376

Item #: 172925

Greenlee

Nail Eater Extreme 1-1/4" hole diameter. Improved cutting edge provides 30 percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s. P.O.P packaged.

61/62PTS-1-1/4 Extreme Short Drill Bit, 1-1/4 in Dia, 7-5/8 in OAL, 7/16 in Shank

MFR: Greenlee

MFR #: 61/62PTS-1-1/4

UPC: 783310304333

Item #: 6539

Greenlee

Nail Eater Extreme 1" hole diameter. Improved cutting edge provides 30percent longer life span. Patented new design for improved cutting and cleaner holes. Self-feeding screw point draws bit through wood. Unique patented design cutting angle - smoother starts, reduced cutting loads. Made of super tough, heat-treated steel. Cuts through nails and provides longer life. Shorty bits - for working in tight places, yet still can go through three abutting 2 x 4s. P.O.P packaged.

62PTS-1 Extreme Short Drill Bit, 1 in Dia, 7-5/8 in OAL, 7/16 in Shank

MFR: Greenlee

MFR #: 62PTS-1

UPC: 783310317982

Item #: 98917

Greenlee

Reciprocating Saw Blades 6" x 3/4" x .35" (152mm x 19.05mm x 8.89mm) 18 Teeth per Inch. Progressive-pitch reciprocating saw blades cut a wide range of standard construction materials quickly and cleanly - regardless of thickness. Bi-metal construction provides maximum flexibility and break resistance - plus lasting sharpness. Exclusive plunge tip makes starting cuts faster and easier.

353-618 Straight Reciprocating Saw Blade, 6 in L x 3/4 in W, 18, Bi-Metal Body

MFR: Greenlee

MFR #: 353-618

UPC: 783310099659

Item #: 39446

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1" (25.4 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-1 Variable Pitch Hole Saw, 1 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 1/4 in, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1

UPC: 783310191384

Item #: 39231

Greenlee

Bit Extension, 12" with 1/4" Hex Shank. For holesaw arbors, spade bits, Nail Eater II bits, Electrician's bits and Step bits. Use for boring deeper in wood.

901-12 Bit Extension With Fixed Pockets, 1/4 in Shank, 12 in L, 9/16 in Dia Body

MFR: Greenlee

MFR #: 901-12

UPC: 783310027065

Item #: 116536

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 2-1/2" (63.5 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-2-1/2 Variable Pitch Hole Saw, 2-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2-1/2

UPC: 783310191629

Item #: 72334

Greenlee

830 Quick Change Hole Saw Kit, For Use With 1/2 to 2 in Conduit, Bi-Metal

MFR: Greenlee

MFR #: 830

UPC: 783310191926

Item #: 62333

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1-7/8" (22.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-7/8 Variable Pitch Hole Saw, 7/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 1/4 in, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-7/8

UPC: 783310191360

Item #: 6748

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 2" (50.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-2 Variable Pitch Hole Saw, 2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2

UPC: 783310191551

Item #: 84656

Greenlee

35720G Replacement Blade With Fixed Pockets, For Use With 35712 4-3/8 in Recessed Light Hole Saw, Steel

MFR: Greenlee

MFR #: 35720G

UPC: 783310357209

Item #: 161639

Greenlee

Quickest, most affordable way to cut perfect holes in ceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting. Installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes. in very abrasive materialsand still stay sharp. Stabilizer spring balancescutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilot drill eliminates changeover time. Fits a 3/8 IN drill chuck and can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris. Quickest, most affordable way to cut perfect holes inceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes in very abrasive materials and still stay sharp. Stabilizer spring balances cutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilotdrill eliminates changeover time. Fits a 3/8 IN drill chuckand can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris.

06923 Adjustable Recessed Quick Change Hole Saw, 2-1/2 to 7 in Dia, Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 6923

UPC: 783310069232

Item #: 59758

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1-1/8" (28.6 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-1-1/8 Variable Pitch Hole Saw, 1-1/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 1/4 in, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-1/8

UPC: 783310191414

Item #: 6816

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1-3/4" (44.4 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-1-3/4 Variable Pitch Hole Saw, 1-3/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-3/4

UPC: 783310191520

Item #: 84625

Greenlee

Holesaw Pilot Drill Bit 1/4" x 3-1/4". Pilot Drills Have Unique Split-Point Tip Design

39893 Replacement Pilot Drill Bit, 1/4 in Pilot Drill, High Speed Steel

MFR: Greenlee

MFR #: 39893

UPC: 783310398936

Item #: 1345

Greenlee

Ultra Cutter Kit. Includes 7/8" - 2-1/2" cutters, two small arbors for extended assembly to 7/8" and 1-1/8" cutters, large arbor, hex wrench and case. For conduit sizes 1/2" - 2". Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

930 Ultra Hole Cutter Kit, 6 Pieces, For Use With 1/2 to 2 in Conduit, HSS

MFR: Greenlee

MFR #: 930

UPC: 783310102144

Item #: 16170

Greenlee

Holesaw Pilot Drill Bit 1/4" x 3-1/4" in 6 Pack. Pilot Drills Have Unique Split-Point Tip Design

38526 Replacement Pilot Drill Bit, 1/4 in Pilot Drill, High Speed Steel

MFR: Greenlee

MFR #: 38526

UPC: 783310385264

Item #: 80778

Greenlee

Long-lasting tungsten carbide-grit delivers extremely clean, smooth cuts through tile, cement board, and other abrasive materials. Perfect for cutting holes in Quazite enclosure or hardy board siding for 3-0 box installation. Rugged construction for enduring performance. Use with Arbors listed on page 94.

725-001 Pilot Drill Bit With Fixed Pockets, 1/4 in Pilot Drill, Carbide

MFR: Greenlee

MFR #: 725-001

UPC: 783310100829

Item #: 344367

Greenlee

K2P-3/4 Slug-Buster Round Knockout Punch, 1.12 in Dia Cutting, 3/4 in Conduit/Pipe

MFR: Greenlee

MFR #: K2P-3/4

UPC: 783310087823

Item #: 577730

Greenlee

KD6-10 Gator Hydraulic W Style Crimping Die, 6 to 4 AWG

MFR: Greenlee

MFR #: KD6-10

UPC: 783310101659

Item #: 424980

Filters