Skip to Main Content Skip to Footer Content

Main Content Starts Here

Hole Saws

filter_alt Filters

Showing 241 - 288 of 295 Items

Sort By

Per Page

Brand

Ways to Shop

Brand

Ways to Shop

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 2" (50.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-2 Variable Pitch Hole Saw, 2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2

UPC: 783310191551

Item #: 84656

Greenlee

No Image Available

35720G Replacement Blade With Fixed Pockets, For Use With 35712 4-3/8 in Recessed Light Hole Saw, Steel

MFR: Greenlee

MFR #: 35720G

UPC: 783310357209

Item #: 161639

Greenlee

Quickest, most affordable way to cut perfect holes in ceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting. Installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes. in very abrasive materialsand still stay sharp. Stabilizer spring balancescutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilot drill eliminates changeover time. Fits a 3/8 IN drill chuck and can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris. Quickest, most affordable way to cut perfect holes inceiling tile. Cuts clean, precise holes that ensure no light leakage or poor-fitting installations. Self-sharpening, carbide-sprayed cutting tips can cut dozens of holes in very abrasive materials and still stay sharp. Stabilizer spring balances cutting forces and offers more control of the tool when drilling drywall. Dedicated arbor and pilotdrill eliminates changeover time. Fits a 3/8 IN drill chuckand can be used with a cordless drill. Included dust shield helps eliminate flying dust and debris.

06923 Adjustable Recessed Quick Change Hole Saw, 2-1/2 to 7 in Dia, Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 6923

UPC: 783310069232

Item #: 59758

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1-1/8" (28.6 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-1-1/8 Variable Pitch Hole Saw, 1-1/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 1/4 in, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-1/8

UPC: 783310191414

Item #: 6816

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1-3/4" (44.4 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-1-3/4 Variable Pitch Hole Saw, 1-3/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-3/4

UPC: 783310191520

Item #: 84625

Greenlee

Ultra Cutter Kit. Includes 7/8" - 2-1/2" cutters, two small arbors for extended assembly to 7/8" and 1-1/8" cutters, large arbor, hex wrench and case. For conduit sizes 1/2" - 2". Lasts 10 times longer thanstandard hole saws. Precision-ground teeth cut smooth, burr-free holes with ease. 1/4" (6.35 mm) capacity. Durability and speed provide low cost per hole. Split-point pilot drill prevents walking - makes accurate hole placement easy. Spring-loaded slug ejector saves time. No tool required to change cutter sizes. Less chance of broken teeth because the saw body is machined out of solid, high-speed steel.

930 Ultra Hole Cutter Kit, 6 Pieces, For Use With 1/2 to 2 in Conduit, HSS

MFR: Greenlee

MFR #: 930

UPC: 783310102144

Item #: 16170

Greenlee

No Image Available

725-1-3/8 Hole Saw, 1-3/8 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-1-3/8

UPC: 783310100751

Item #: 333596

Greenlee

645-3 Quick Change 3 inch Carbide Tipped Hole Cutter

645-3 Quick Change 3 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-3

UPC: 783310057079

Item #: 150338

Greenlee

Carbide-Tipped Hole Cutter 2-1/2" (63.5mm). Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.

625-2-1/2 Hole Cutter, 2-1/2 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 625-2-1/2

UPC: 783310383369

Item #: 404446

Greenlee

625-1-3/8 1-3/8 inch Carbide Tipped Hole Cutter

625-1-3/8 1-3/8 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-1-3/8

UPC: 783310383314

Item #: 62929

Greenlee

645-2-3/8 Quick Change 2-3/8 inch Carbide Tipped Hole Cutter

645-2-3/8 Quick Change 2-3/8 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-2-3/8

UPC: 783310059615

Item #: 72202

Greenlee

No Image Available

825-1-1/4 Variable Pitch Variable Pitch Hole Saw, 1-1/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-1/4

UPC: 783310191445

Item #: 39263

Greenlee

No Image Available

825-3/4 Variable Pitch Hole Saw, 3/4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 1/4 in, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-3/4

UPC: 783310191346

Item #: 36823

Greenlee

No Image Available

725-1-3/4 Hole Saw, 1-3/4 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-1-3/4

UPC: 783310100775

Item #: 513938

Greenlee

No Image Available

904H-12 Bit Extension, Hex Drive, 12 in OAL

MFR: Greenlee

MFR #: 904H-12

UPC: 783310349808

Item #: 84675

Greenlee

No Image Available

891 Electricians/Plumbers Hole Saw Kit, 12 Pieces, For Use With 3/4 to 2-1/2 in Conduit, Bi-Metal

MFR: Greenlee

MFR #: 891

UPC: 783310034803

Item #: 39371

Greenlee

1 1/2" VARIABLE PITCH HOLESAW

825-1-1/2 Variable Pitch Hole Saw, 1-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-1/2

UPC: 783310191483

Item #: 39283

Greenlee

No Image Available

725-7/8 Hole Saw, 7/8 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-7/8

UPC: 783310100720

Item #: 372983

Greenlee

No Image Available

825-2-1/8 Variable Pitch Variable Pitch Hole Saw, 2-1/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-2-1/8

UPC: 783310191582

Item #: 39297

Greenlee

No Image Available

825-4 Variable Pitch Hole Saw, 4 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-4

UPC: 783310191766

Item #: 187038

Greenlee

No Image Available

725-2-1/2 Hole Saw, 2-1/2 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-2-1/2

UPC: 783310100805

Item #: 60924

Greenlee

No Image Available

825-4-1/2 Variable Pitch Hole Saw, 4-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-4-1/2

UPC: 783310191803

Item #: 39345

Greenlee

No Image Available

725-1-1/8 Hole Saw, 1-1/8 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-1-1/8

UPC: 783310100737

Item #: 372982

Greenlee

No Image Available

825-4-3/8 Variable Pitch Variable Pitch Hole Saw, 4-3/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-4-3/8

UPC: 783310191797

Item #: 252990

Greenlee

No Image Available

825-5/8 Variable Pitch Variable Pitch Hole Saw, 5/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge

MFR: Greenlee

MFR #: 825-5/8

UPC: 783310191322

Item #: 206018

Greenlee

2" CARBIDE GRIT HOLESAW

725-2 Hole Saw, 2 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-2

UPC: 783310100782

Item #: 47761

Greenlee

No Image Available

825-5-1/2 Variable Pitch Hole Saw, 5-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-5-1/2

UPC: 783310191834

Item #: 353459

Greenlee

No Image Available

825-3-1/2 Variable Pitch Variable Pitch Hole Saw, 3-1/2 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-3-1/2

UPC: 783310191711

Item #: 244874

Greenlee

No Image Available

904H-18 Bit Extension, Hex Drive, 18 in OAL

MFR: Greenlee

MFR #: 904H-18

UPC: 783310353560

Item #: 7555

Greenlee

CUTTER SET (POP)

11180 Hole Saw Cutter Set With Fixed Pockets, 3 Pieces, For Use With Deburring Tool

MFR: Greenlee

MFR #: 11180

UPC: 783310111801

Item #: 50503

Greenlee

645-1-1/2 Quick Change 1-1/2 inch Carbide Tipped Hole Cutter

645-1-1/2 Quick Change 1-1/2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-1-1/2

UPC: 783310057017

Item #: 361809

Greenlee

Quick Change Carbide Tipped Hole Cutter 2-1/8" (54.0 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

645-2-1/8 Quick-Change Hole Cutter, 2-1/8 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 645-2-1/8

UPC: 783310059608

Item #: 438652

Greenlee

645-2-1/2 Quick Change 2-1/2 inch Carbide Tipped Hole Cutter

645-2-1/2 Quick Change 2-1/2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-2-1/2

UPC: 783310057055

Item #: 45610

Greenlee

Carbide-Tipped Hole Cutter 1" (25.4mm). Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.

625-1 Hole Cutter, 1 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 625-1

UPC: 783310383277

Item #: 433985

Greenlee

No Image Available

625-2 2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-2

UPC: 783310383345

Item #: 359123

Greenlee

Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. eliminates need for center punch.

625-1-7/32 Hole Cutter, 1-7/32 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 625-1-7/32

UPC: 783310383291

Item #: 160101

Greenlee

645-1-7/32 Quick Change 1-7/32 inch Carbide Tipped Hole Cutter

645-1-7/32 Quick Change 1-7/32 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-1-7/32

UPC: 783310056980

Item #: 116804

Greenlee

No Image Available

625-1-3/4 Hole Cutter, 1-3/4 in Dia, 8 ga D Cutting, Tungsten Carbide Tip Cutting Edge

MFR: Greenlee

MFR #: 625-1-3/4

UPC: 783310383338

Item #: 359122

Greenlee

No Image Available

625-1-1/2 1-1/2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-1-1/2

UPC: 783310383321

Item #: 505871

Greenlee

No Image Available

625-3/4 3/4 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-3/4

UPC: 783310383246

Item #: 38084

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 3". Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-3 Variable Pitch Hole Saw, 3 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-3

UPC: 783310191674

Item #: 39330

Greenlee

No Image Available

725-3-5/8 Hole Saw, 3-5/8 in Dia, Tungsten Carbide Cutting Edge

MFR: Greenlee

MFR #: 725-3-5/8

UPC: 783310100812

Item #: 292080

Greenlee

Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 24 FT collapses to 50 IN x 2 1/4 IN and uses snap-lock buttons to maintain extended reach capabilities. Install suspension wires for drop ceilings.

FP24 Non-Conductive Fish Pole, 2-1/4 in Dia x 50 in L, Fiberglass, Green

MFR: Greenlee

MFR #: FP24

UPC: 783310104438

Item #: 48969

Greenlee

Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 18 FT collapses to 27 IN x 2 IN and uses friction-locking system. Install suspension wires for drop ceilings.

FP18 Non-Conductive Fish Pole, 2 in Dia x 27 in L, Fiberglass, Green

MFR: Greenlee

MFR #: FP18

UPC: 783310104421

Item #: 48956

Greenlee

No Image Available

35723 Replacement Replacement Blade, For Use With 35715 6-7/8 in Steel Toothed Recessed Light Hole Saw, Steel

MFR: Greenlee

MFR #: 35723

UPC: 783310357230

Item #: 442142

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 4-1/8" (104.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

825-4-1/8 Variable Pitch Hole Saw, 4-1/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-4-1/8

UPC: 783310191773

Item #: 235145

Greenlee

830Q Quick Change Hole Saw Kit, For Use With 1/2 to 2 in Conduit, Bi-Metal

MFR: Greenlee

MFR #: 830Q

UPC: 783310028062

Item #: 203734

Greenlee

No Image Available

825-1-7/8 Variable Pitch Variable Pitch Hole Saw, 1-7/8 in Dia, 1-5/8 in D Cutting, Bi-Metal Cutting Edge, 5/16 in, 7/16 in Arbor

MFR: Greenlee

MFR #: 825-1-7/8

UPC: 783310191544

Item #: 266892