Features

• Power failure memory should power be interrupted, the repeater will return to its previous state when power is restored
• Up to four (4) auxiliary repeaters can be added to extend the RF range for larger system applications
• One LED on, Ethernet cable plugged in, powered by the 9 V adapter test condition
• Each repeater has an RF range of 30 ft, covering a total area of approximately 2500 sq-ft
• Test button enters the system diagnostic mode
• System with 2 main repeaters must be connected via ethernet
• RS485 port to connect to other repeaters through a wired link (daisy-chain)
• Tested to withstand electrostatic discharge without damage or memory loss
• Main repeaters allow configuration and integration to the system through ethernet or RS232 ports
• Ethernet, RS232 and RS485 main repeater, white color
• 6.25 in antenna length
• For systems that extend up to 30 ft (9 m), one (1) main repeater is required to set up the system
• Can be programmed from a PC
• Mount on a wall, ceiling, or level surface using the two M3 screws provided