5331 5300 In-Line Motor Lead Splice Kit, 5/8 kV, 8 to 4 AWG, 10 to 4 AWG Conductor, 10 to 11 in L Splice, EPDM Rubber
- MFR #:
- 5331
- Item #:
- 21301
5331 5300 In-Line Motor Lead Splice Kit, 5/8 kV, 8 to 4 AWG, 10 to 4 AWG Conductor, 10 to 11 in L Splice, EPDM Rubber
- MFR #:
- 5331
- Item #:
- 21301
Product Details
3M™ motor lead in-line splicing kits 5300 series are designed for splicing motor lead cables to incoming feeder cables. 3M™ motor lead splicing kits 5331-5334 can accommodate in-line connections, 5/8 kV shielded and non-shielded feeders. The splices main component, the slip-on splice cover is made from EPDM rubber. A mastic strip is used for the moisture seal on the inline kits. These kits are designed to be used with copper compression, 1 or 2-hole lugs. after being crimped onto the cables, the lugs are bolted together in an inline configuration, then insulated and sealed with the 3M™ motor lead splicing kits. Each kit contains all the necessary materials (except lugs) needed to make three splices. The lugs must be purchased separately. 3M™ Scotchlok™ 30000 series copper compression lugs or other UL listed copper lugs, can be used. In addition, 3M™ motor lead splicing kits 5331-5334 require vinyl tape which can also be purchased separately. For in-line splice kits the longitudinal space required for assembly will be approximately 2 (splice cover length), to allow space for the splice while the connection is being made.
Manuals & Documentation
Features
- Fast and simple installation
- No torches or heat source required
- No special tool required to install splice
- Thick walls to resist puncture and abrasion damage
- High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
- Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connection for 1000 VAC and less cables sized 16 AWG to 500 kcmil
- 365 V/mil dielectric strength
- 750% elongation
- 1400 psi tensile strength
- 3/4 in L maximum bolt
- Polyethylene cable
- 8 to 4 AWG feeder cable 10 to 4 AWG motor lead conductor size
Specifications
Identifiers
| Manufacturer Part Number |
5331
|
|---|
General Information
| Manufacturer |
3M
|
|---|---|
| Brand |
3M™
|
| Country Of Origin |
US
|
| Standards Approvals |
RoHS Compliant | SA Certified
|
|---|---|
| Application |
For splicing motor lead cables to incoming feeder cables and 30000 series copper compression lugs or other UL Listed copper lugs applications
|
| Includes |
(12) Adapters, (6) Tubes of Silicone Grease, (3) Rolls Scotch® 2220 Stress Control Tapes, (3) Bags of Solvent Cleaning Cloths, (3) Cold Shrink Tubes, (3) Rolls Scotch® 130C Linerless Rubber Splicing Tapes and (3) Instruction Sheets
|
Dimensions
| Dimensions |
11 in L
|
|---|
Technical Information
| Color |
Black
|
|---|---|
| Material |
EPDM Rubber
|
| Series |
5300
|
| Temperature Rating |
90 deg C
|
|---|---|
| Type |
In-Line
|
| Voltage Rating |
5/8 kV
|