Features

• Continuous, flicker-free dimming from 100% to less than 1% for T8, 1% for T5 and T5-HO and 5% for T5 Twin-tube
• Non-volatile memory restores all ballast settings after power failure
• Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, relay failure and component life degradation
• Because Hi-Lume® 3D is microprocessor-controlled, it can operate on the EcoSytem digital control bus and has the ability to listen, think, decide and remember, this provides a new level of flexibility in configuring lighting while saving energy
• 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem® digital controls for consistent fixture to fixture dimming performance
• Frequency of operation ensures that ballast does not interfere with infrared devices operating between 38 and 42 kHz
• Ballast protected from miswires of any input power to control lead or from lamp leads to each other and ground
• <=90% non condensing relative humidity, 75 deg C max ballast case temperature, class A sound rating
• Ballasts maintain consistent light output for different lamp lengths, ensuring fixture to fixture uniformity
• Ultra quiet operation
• 100% performance tested and burned in at factory
• Lamps turn on to any dimmed level without flashing to full brightness
• Hi-Lume® 3D ballasts deliver high dimming ratios and efficiency in a slim-profile enclosure, making it a great choice for low-profile architectural fixtures
• 68.4 W at 120 VAC, 67.2 W at 240 VAC, 66.5 W at 277 VAC
• Low harmonic distortion throughout the entire dimming range maintains power quality
• Programmed rapid start design preheats lamp cathodes before applying full arc voltage to ensure full rated lamp life while dimming and cycling