Features

• Housing -20 ga aluminum, UL listed for direct contact with thermal insulation, AirSeal® housing minimizes air leakage to less than 2 cfm at 1.57 PSF (75 pa) and reduces heat loss and condensation in ceiling, access door for inspection of junction box
• Mounting frame - 22 ga galvanized steel, accommodates ceilings up to 1 in thick, 3/8 in deep integral lip, locks into position along length of mounting bars with locking screw and bendable slot, four slots are positioned 90 deg apart to simplify alignment, push-in/twist-out roto-clips hold reflector flush to ceiling
• Junction box - 2 x 4 x 3-1/2 in (22 cu-in) 22 ga galvanized steel, UL listed for maximum of (6) 12 AWG 90 deg C through branch circuit conductors, cable clamp permit attachment of non-metallic 14 to 12 AWG Romex® cable without tools or additional connectors
• Mounting bars - 16 ga galvanized steel, bars pivot for easy attachment and wire-in below ceiling line, bars extend to accommodate 16 to 24 in OC joist spacing, bars can accommodate 12 in OC joist spacing after a slight field modification
• Integral self tapping philips screws for secure attachment to wood or metal construction
• Socket housing - impact extruded aluminum or galvanized steel
• Socket - porcelain medium base, nickel plated screw shell, pre wired with 18 AWF SF1 (300 V 200 deg C) leads to junction box
• Thermal protector located inside housing