Features

• Dual protection - thermal cutout with indicator light and one time thermal fuse, Tangential blower for whisper quiet operation
• The fan motor shall be impedance protected, permanently lubricated
• Thermal cutout shall be bi-metallic, snap action-type designed to shut-off heat in the event of over heating
• A pilot light that will illuminate if the over temperature protector trip shall be provided
• The element shall contain a one shot thermal protector that act as a back-up protector
• It shall attach to the back box with two screw
• The surface mounting frame shall be of heavy gauge steel designed to mount around the back box for a finished surface installation
• Slot knockout shall be provided for power supply conduit
• All sheet metal part are galvanized steel except the front cover which shall be electro static polyester powder paint coated
• Without built-in thermostat
• Three piece construction for ease of installation, permanently lubricated, dust protected bearings
• Back box shall be heavy gauge galvanized steel and shall contain knock outs through which field wiring leads enter the box, A ground wire pigtail lead shall be attached to the back box, detachable back box mounting feet shall be used to insure proper installation
• Inner frame assembly shall consist of a heavy gauge galvanized steel chassis on which are mounted the heating element, protected motor and tangential blower and over temperature protector, inner frame assemble shall be completely prewired with pigtail leads for field wiring, inner frame assembly shall lock into the back box without fasteners
• Heating element shall be a fast response open coil type for quick warm up and low maintenance, element shall cover the discharge area to ensure uniform heating of all discharge air
• Minimum clearance of 4 in from floor, 6 in from adjacent walls and 36 in from the ceiling
• Steel grille
• The back box shall be designed for duty as a recessed rough-in box in either masonry or frame construction