Skip to Main Content Skip to Footer Content

Main Content Starts Here

Fluke

Founded in 1948, Fluke is one of the world’s leading manufacturers of industrial electronic test tools, diagnostic equipment, thermal imaging devices, and metering equipment. Our instruments are well known for their accuracy, convenience, and durability.

filter_alt Filters

Showing 97 - 144 of 297 Items

Sort By

Per Page

Fluke

Fluke Current Clamps are the ideal tools to extend the current ranges of Multimeters. Is a single range 200A ac current clamp with current output via safety shrouded banana plugs. Is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs.

I200 Clamp-On AC Current Probe, 600 V AC, 200 A, 0.5 to 240 A Measuring Range, 0.8 in Jaw

MFR: Fluke

MFR #: I200

UPC: 095969063937

Item #: 144584

Fluke

Built for the masters of temperature. The Fluke 724: everything you need to troubleshoot and calibrate temperature. Now you can carry one tool to expertly test all the temperature sensors and transmitters in your plant. The Fluke 724 is the masters answe

FLUKE-724 Temperature/Thermometer Calibrator Accessory, 10 to 55 deg F Temperature

MFR: Fluke

MFR #: FLUKE-724

UPC: 095969083355

Item #: 385605

Fluke

Energy logging is now within your reachdiscover where youre wasting energy, optimize your facilitys energy use and reduce your bill The new Fluke 1732 and 1734 Three-Phase Electrical Energy loggers introduce a new simplicity to discovering sources of electrical energy waste. Profiling energy usage across your facility helps you identify opportunities for energy savings, and provides you with the data you need to act on them.

FLUKE-1734/EUS 3-Phase Energy Logger

MFR: Fluke

MFR #: FLUKE-1734/EUS

UPC: 095969801980

Item #: 438656

Fluke

Handy all-in-one kit includes AC220 SureGrip Alligator Clip Set, TP1 Slim-Reach Test Probes (flat bladed), and TL224 SureGrip Silicone Test Lead Set (straight to right)

TL223 SureGrip All-in-One Electrical Test Lead Set, 6 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TL223

UPC: 095969206464

Item #: 81945

Fluke Networks

No Image Available

JR-LEV-1 8-Wire Punch Down Termination Tool

MFR: Fluke

MFR #: JR-LEV-1

UPC: 754082059219

Item #: 369995

Fluke

No Image Available

803293 Fast Acting Cartridge Fuse, 11 A, 1 kV AC, 20 kA

MFR: Fluke

MFR #: FUSE-11A/1000V-BLSTR

UPC: 095969095761

Item #: 101372

Fluke

SET OF 2 BANANA TO BNC ADAPTER

BB120-IV Set BNC Adapter, 300 to 600 Vrms

MFR: Fluke

MFR #: BB120-IV

UPC: 095969868136

Item #: 742373

Fluke

Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools.

I410 Current Clamp, 400 A, 3 kHz, Digital Display

MFR: Fluke

MFR #: I410

UPC: 095969048194

Item #: 180582

Fluke

FLUKE 3 IN (75MM) INFRARED WINDOW WITH HAND TURN DOOR LATCH

FLUKE-CV300 ClirVu CV Series Infrared Window With Hand Turn Door Latch, 3 in Crystal Insert, 0.64 in THK Window

MFR: Fluke

MFR #: FLUKE-CV300

UPC: 095969667074

Item #: 311344

Fluke Networks

MULTIMODE LAUNCH CABLE 62.5UM SC/SC

MULTIMODE LAUNCH CABLE 62.5UM SC/SC

MFR: Fluke

MFR #: MMC-62-SCSC

UPC: 754082094296

Item #: 396366

Fluke

SureGrip Master Accessory Set that includes leads and probes in a handy roll-up pouch

TLK-225 SureGrip Industrial Master Test Lead Set, 13 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TLK-225

UPC: 095969241878

Item #: 13527

Fluke

FLUKE-378-FC Non-Contact Voltage True-RMS AC/DC Wireless Clamp Meter with iFlex and Power Quality Indicator

FLUKE-378-FC Non-Contact Voltage True-RMS AC/DC Wireless Clamp Meter with iFlex and Power Quality Indicator

MFR: Fluke

MFR #: FLUKE-378-FC

UPC: 095969916615

Item #: 637555

Fluke

Basic Electronic Test Lead Set

TL80A Basic Electronic Test Lead Set, 9 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TL80A

UPC: 095969077309

Item #: 239263

Fluke

All the bells and whistles. The Fluke 381 is the first clamp meter with a detachable, remote display and iFlex flexible current probe for easier, faster, safer measurements. Be ready for anything. The Fluke 381 does everything you would expect from a clamp meter, and then lets you remove the display for even more flexibility. Now one technician can do jobs that used to require two people. Clamp the Fluke 381 around a conductor, remove the display and walk across the room to operate controls or remove protective equipment, all while watching real-time readings. The iFlex flexible current probe (included) expands the measurement range to 2500 A ac while providing increased display flexibility, ability to measure awkward sized conductors and improved wire access.

FLUKE-381 True-RMS Remote Display AC/DC Clamp Meter with iFlex

MFR: Fluke

MFR #: FLUKE-381

UPC: 095969537483

Item #: 19085

Fluke

Electronic Test Probe, Length: Upto 100 MM Probe Tip, 1 MR Test Lead, CAT II 1000 V Rated

TL910 Electronic Test Probe, 1 kV AC, 3 A, CAT II 1000 V

MFR: Fluke

MFR #: TL910

UPC: 095969106887

Item #: 329093

Fluke

The Meter Case is zippered with a detachable front pouch that accomodates the Fluke 120 Series ScopeMeter Testtool or a handheld DMM, along with both main instrument and test accessories.

C125 Compact Soft Meter Case

MFR: Fluke

MFR #: C125

UPC: 095969052894

Item #: 15516

Fluke

Replacement Test Leads For Fluke T5-1000 or T5-600 Voltage, Continuity and Current Testers

T5-RLS Replacement Test Lead Set, 1 Pieces, For Use With T5-600 and T5-1000 Electrical Testers

MFR: Fluke

MFR #: T5-RLS

UPC: 095969609791

Item #: 260338

Fluke

The hard case that fits all Fluke Industrial Test Tools. Configure the diced foam interior to store and protect what you need to carry with you.

C101 Hard Latch Closure Carrying Case, 4 in L x 14-1/4 in W x 12.6 in D, Plastic

MFR: Fluke

MFR #: C101

UPC: 095969291743

Item #: 131791

Fluke

The Fluke 9040 is effective for measuring phase rotation in all areas where three phase supplies are used to feed motors, drives and electrical systems. The Fluke 9040 is a rotary field indicator and can provide clear indication of the 3 phase via an LCD display and the phase rotation direction to determine correct connections. It allows rapid determination of phase sequence and has a voltage (up to 700 V) and frequency range suitable for commercial and industrial applications. The included test probes have a variable clamping range for safe contact, also in industrial sockets.

FLUKE-9040 Phase Rotation Indicator Tester

MFR: Fluke

MFR #: FLUKE-9040

UPC: 095969291361

Item #: 127427

Fluke

Output Cable Length: 1.5 m Maximum Conductor Size: 32 mm Storage Temperature: -20 degrees Celsius to 60 degrees Celsius Operating Temperature: 0 degrees Celsius to 50 degrees Celsius Relative Humidity: 10 degrees Celsius to 30 degrees Celsius: 95 percent 30 degrees Celsius to 40 degrees Celsius: 75 percent 40 degrees Celsius to 50 degrees Celsius: 45 percent Temperature Coefficient: 0.01 X (specified accuracy)/ degrees Celsius (< 18 degrees Celsius or > 28 degrees Celsius) Altitude: Operating: 2000 m Non-operating: 12000 m Dimensions: 150 x 70 x 30 mm Weight: 114 g

I400 AC Current Clamp

MFR: Fluke

MFR #: I400

UPC: 095969268608

Item #: 4685

Fluke

FLUKE-375/FC True-RMS AC/DC Clamp Meter, 600 Amp

FLUKE-375/FC True-RMS AC/DC Clamp Meter, 600 Amp

MFR: Fluke

MFR #: FLUKE-375-FC

UPC: 095969798464

Item #: 524547

Fluke

SureGrip accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of large alligator clips with nickel plated jaws. Multi-purpose tooth pattern grips anything from fine guage wire to a 20 mm bolt. Recommended for use with TL222 and TL224 test leads. CAT IV 600V, CAT III 1000 V, 10 A rating, UL Listed

AC285 SureGrip Alligator Clips

MFR: Fluke

MFR #: AC285

UPC: 095969103428

Item #: 37604

Fluke

FLUKE-771 Milliamp mA Process Clamp Meter

FLUKE-771 Milliamp mA Process Clamp Meter

MFR: Fluke

MFR #: FLUKE-771

UPC: 095969349697

Item #: 47386

Fluke Networks

JACKRAPID TERMINATION TOOL (FOR LEVITON 61110, 5G110, 6110G)

JR-LEV-2 8-Wire Punch Down Termination Tool

MFR: Fluke

MFR #: JR-LEV-2

UPC: 754082059226

Item #: 764268

Fluke

SureGrip Insulated Test Leads

TL224 SureGrip Insulated Test Lead Set, 2 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TL224

UPC: 095969103442

Item #: 98437

Fluke

Rigid Back Probe Pin Set, Voltage Rating: 60 VDC, Length: Tip: 2 IN, Color: One Red And One Black, For Use On 2 MM OD Probe Tips

TP88 Rigid Back Test Probe Set, 60 V DC, 0.125 A, 2 in L

MFR: Fluke

MFR #: TP88

UPC: 095969261289

Item #: 510684

Fluke

Handy all-in-one kit includes AC220 SureGrip Alligator Clip Set, TP220 SureGrip Industrial Test Probe Set, and TL224 SureGrip Silicone Test Lead Set (straight to right)

TL220 SureGrip All-In-One Industrial Test Lead Set, 6 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TL220

UPC: 095969206457

Item #: 15642

Fluke

Fluke Alligator Clip Set

AC175 Threaded Alligator Clip Set

MFR: Fluke

MFR #: AC175

UPC: 095969612425

Item #: 241295

Fluke

Premium test lead set for Fluke products.

TL71 Premium Test Lead Set, 2 Pieces, For Use With Electrical Tester

MFR: Fluke

MFR #: TL71

UPC: 095969077293

Item #: 125137

Fluke

TwistGuard Test Probe With 4 MM Adapter, Voltage Rating: 1000 V, Amperage Rating: 10 AMP, Diameter: Tip: 2 MM, Color: Red And Black Insulator, UL Listed, Conforms To EN61010-031, CAT II 1000 V, CAT III 1000 V, CAT IV 600 V Rated, For Use With The TL22X Series, TL238 And TL27 Test Leads And Multimeters

TP175E TwistGuard Test Probe With 4 MM Adapter Electronic Measuring Probe, 10 A, 1 kV

MFR: Fluke

MFR #: TP175E

UPC: 095969528894

Item #: 391873

Fluke

Series 566 Infrared And Contact Thermometer, Temperature Range: -40 To 650 DEG C, Accuracy: Less Than 0 DEG C (32 DEG F): Plus/Minus (1.0 DEG C (Plus/Minus 2 DEG F) Plus 0.1/1 DEG C or DEG F) Greater Than 0 DEG C (32 DEG F): Plus/Minus 1 PCT or Plus/Minus 1 DEG C (Plus/Minus 2 DEG F), whichever is greater, Resolution: 0.1 DEG C, Spectral Response: 8 - 14 MIC-MR, Laser Sighting: Single Point Laser Less Than 1 MILW Output Class 2 (II) Operation, 630 - 670 NMTR, Response Time: Less Than 500 MS, Emissivity: By Built-In Table Of Common Materials Or Digitally Adjustable From 0.10 To 1.00 By 0.01, Display: Dot Matrix 98 X 96 Pixels With Function Menus, Alarm: High/Low Audible And Two-Color Visual, Data Logging: Yes, Trigger: Lock Mechanism, Battery Type: (2) AA/LR6 Laser And Backlight ON 12 HR Laser And Backlight OFF 100 HR, Dimensions: 6.965 IN Height X 6.441 IN Length X 2.039 IN Width

FLUKE-566 Infrared and Contact Thermometer, -40 to 1202 deg F, +/- 1%, 1 in at 30 in Focus Spot, 0.1 to 1 u, AA Battery

MFR: Fluke

MFR #: FLUKE-566

UPC: 095969400367

Item #: 7906

Fluke

Type K Flexible Cuff Thermocouple Temperature Probe, Temperature Range: -30 To 150 DEG C, Probe Connector: Hytrel 4774 Yellow Mini-Thermocouple With 1/2 IN Pin, Wire Length: 78 IN Lead Wire, 19-1/2 IN Fabric Hook-And-Loop Fastener Cuff, Insulation Material: Hytrel, Voltage Rating: 24 VAC RMS Or 60 VDC Maximum For Proper Safe Operation, Accuracy: Plus/Minus 1.5 DEG C, Maximum Probe Temperature: 200 DEG C, For Hands Free Measurement Of HVAC Temperature Measuring Applications

80PK-11 Type K Flexible Cuff Thermocouple Temperature Probe, 78 in Lead Wire, 19-1/2 in Fabric Hook-And-Loop Fastener Cuff L Wire

MFR: Fluke

MFR #: 80PK-11

UPC: 095969364362

Item #: 230693

Fluke

No Image Available

80PK-8 Pipe Clamp Temperature Probe, 24 V AC/60 V DC, PVC Insulation, 40 in L

MFR: Fluke

MFR #: 80PK-8

UPC: 095969040778

Item #: 355492

Fluke

Thermocouple Plug Kit 700C1 (Ten types of Mini-Plug Connectors)

FLUKE-700TC1 Plug Kit CHK, B/C/E/J/K/L/N/R/S/T/U Thermocouple

MFR: Fluke

MFR #: FLUKE-700TC1

UPC: 095969050791

Item #: 590401

Fluke

No Image Available

FLUKE-53-2/B-60HZ Digital Thermometer CHK, -40 to 260 Degrees C

MFR: Fluke

MFR #: FLUKE-53-2/B-60HZ

UPC: 095969565103

Item #: 321743

Fluke

Temperature Humidity Meter, Display: Dual Back Light, Minimum/Maximum Memory: Yes, Response Time: 60 S, Temperature Accuracy: 0 - 45 DEG C At (Plus/Minus 0.5 DEG C), Humidity Accuracy: 10 - 90 PCT At 23 DEG C For (Plus/Minus 2.5), Relative Humidity Range: 5 - 95 PCT, Temperature Range: -20 To 60 DEG C, Dimensions: 194 MM Height X 60 MM Width X 34 MM Depth, Battery: (4) AAA Alkaline, EnvironmentalCondition: Operating Temperature: -20 To 60 DEG C, Humidity: 0 - 55 DEG C, Storage Temperature: -20 To 60 DEG C, Resolution: 0.1 DEG C

FLUKE-971 Temperature Humidity Meter, -20 to 60 deg C, 0.1 deg C Resolution, (4) AAA Alkaline Battery, Dual Backlit Display

MFR: Fluke

MFR #: FLUKE-971

UPC: 095969287517

Item #: 734774

Fluke

AC/DC Current Clamp With Carry Case Kit, Includes: i410 1 - 400 AMP AC RMS, 1 - 400 AMP DC Current Clamp, Zippered Vinyl Carry Case With Moveable Divider

I410-KIT Current Clamp and Carry Case Kit, 600 V AC, 1 to 400 A, 3 kHz, 1.18 in Jaw, Clamp Connection

MFR: Fluke

MFR #: I410-KIT

UPC: 095969241847

Item #: 163633

Fluke

AC Current Clamp, Model: i2000, Amperage Rating: 20/200/2000 AMP, Voltage Rating: 600 VRMS/VDC, Measuring Range: 20/200/2000 AMP AC RMS At Current, 10 HZ - 20 KHZ (-3 DB) At Frequency, Operating Temperature: 0 - 70 DEG C (Head And Electronics), Dimensions: 4.56 IN Height X 2.69 IN Width X 1.18 IN Depth, Impedance: 100 KOHM Minimum, Battery: (2) AA/MN 1500/LR6 Alkaline, Accuracy: 25 DEG C, Plus/Minus 1 PCT Of Range 45 - 65 HZ, Diameter: 178 MM Maximum Conductor 14.3 MM Head Cable, Storage Temperature: -40 To 105 DEG C (Head), -20 To 85 DEG C (Electronics), EN 61010-031: 2002, EN 61010-2-032: 2002, EN 61010-1: 2001, 600 VRMS, Category III, EN 61326: 1998 And A1, A2 And A3, For Use With Multimeters, Recorders Or Data Loggers

I2000-FLEX AC Current Clamp Meter, 600 V AC/DC, 20/200/2000 A, 10 Hz to 20 kHz

MFR: Fluke

MFR #: I2000-FLEX

UPC: 095969345088

Item #: 171064

Fluke

Includes model AC285, a pair of red and black extra large alligator clips plus adaptors to securely attach the AC285 alligator clips to Fluke fused test probes FTP-1, FTPL-1, FTP and FTPL. SureGrip accessories are designed to improve steadiness

AC285-FTP Alligator Clip and Adapter, Nickel Plated Steel Jaw

MFR: Fluke

MFR #: AC285-FTP

UPC: 095969606448

Item #: 349893

Fluke

TwistGuard Test Lead Set, Included: Removable 4 MM Lantern Tips That Thread Onto The Lead Tip, 10 AMP Maximum Current, Operating Temperature: -20 To 55 DEG C, CAT II 1000 V, CAT III 1000 V And CAT IV 600 V Rated, Conforms To EN61010-031

TL175E TwistGuard Test Lead Set, Silicone, Black/Red

MFR: Fluke

MFR #: TL175E

UPC: 095969528887

Item #: 539940

Fluke

The new Fluke 1732 Three-Phase Electrical Energy loggers introduce a new simplicity to discovering sources of electrical energy waste. Discover when and where energy in your facility is being consumed, from the service entrance to individual circuits. Access and share data remotely with your team via the Fluke Connect app so you can maintain safer working distances and make critical decisions in real-time, reducing the need for protective equipment, site visits and check-ins.

FLUKE-1732/EUS Energy Logger CHK

MFR: Fluke

MFR #: FLUKE-1732/EUS

UPC: 095969801942

Item #: 438655

Fluke

USB Cable Adapter

IR189USB USB Cable Adapter, For Use With FLUKE-189/FVF2 Kit, 18X and 28X Digital Multimeter

MFR: Fluke

MFR #: IR189USB

UPC: 095969288705

Item #: 195972

Fluke

The Fluke 715 Volt/mA Calibrator delivers outstanding performance, durability and reliability. Offered in the rugged Fluke 80 Series DMM package, the calibrator is compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 715 is easy to use. It is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes.

FLUKE-715 Calibrator CHK

MFR: Fluke

MFR #: FLUKE-715

UPC: 095969050692

Item #: 192107

Fluke

No Image Available

FLUKE-707 Loop Calibrator CHK

MFR: Fluke

MFR #: FLUKE-707

UPC: 095969107150

Item #: 24064

Fluke

The Fluke 705Loop Calibrator is a cost-effective, integrated solution for calibration, repair and maintenance of current loops.

FLUKE-705 Loop Calibrator

MFR: Fluke

MFR #: FLUKE-705

UPC: 095969062565

Item #: 173818

Fluke

Fluke Soft Meter Case

C12A Zipper Closure Meter Case, 1-1/2 in L x 5 in W x 12.99 in D, Vinyl

MFR: Fluke

MFR #: C12A

UPC: 095969028257

Item #: 64792

Fluke

No Image Available

TRM50 Audio/Video BNC Adapter, Black

MFR: Fluke

MFR #: TRM50

UPC: 095969601948

Item #: 742330

Fluke

Banana Voltage Lead Set, 4 Number Of Phase, For Fluke 1735/45 Power Logger

VL1735/45 4-Phase Banana Voltage Lead Set, For Use With 1735/45 Power Logger

MFR: Fluke

MFR #: VL1735/45

UPC: 095969460514

Item #: 679316