Enclosures and Accessories
Showing 1 - 34
of 34
products
T1EFL Lock latch and handle, For Use With Type 1 Small, Medium and Large Panel Enclosure, Steel, Plated
MFR:
Eaton
MFR #:
T1EFL
UPC:
782051279504
Item #:
173434
K4722 Enclosure Mounting Rack, For Use With Current Transformer, H Code 50 kA, 800 A, 600 V AC, 60 Hz, Aluminum
MFR:
Milbank Manufacturing
MFR #:
K4722
UPC:
784572237919
Item #:
73142
K4729 Enclosure Mounting Rack, For Use With Current Transformer, G Code 50 kA, 800 A, 600 V AC, 60 Hz, Aluminum
MFR:
Milbank Manufacturing
MFR #:
K4729
UPC:
784572239401
Item #:
109915
K4797 Enclosure Mounting Rack, For Use With Current Transformer, A Code 50 kA, 800 A, 600 V AC, 60 Hz, Aluminum
MFR:
Milbank Manufacturing
MFR #:
K4797
UPC:
784572248137
Item #:
54131
8901840 TS Series Left Double Door With Locking System, For Use With 2000 mm H x 800 mm W TS8 Series Enclosure, Sheet Steel
MFR:
Rittal
MFR #:
8901840
UPC:
639889880702
Item #:
509313
8901850 Double Enclosure Door With Locking System, 2000 mm H x 800 mm W, For Use With TS 8 Series Enclosure, Sheet Steel
MFR:
Rittal
MFR #:
8901850
UPC:
639889880719
Item #:
648216
CMFKSS A80 Mounting Foot Kit, Surface Mount, For Use With NEMA 1 Networking Wall Mount and COMLINE Enclosures, 304 Stainless Steel, Plated
MFR:
nVent
MFR #:
CMFKSS
UPC:
783510657505
Item #:
91012
PTRA24T ProTek DWDH2 Tapped Hole Rack Angle, Steel
MFR:
nVent
MFR #:
PTRA24T
UPC:
783510237721
Item #:
337160
HH05GS61001 MCLA Filter Fan Shroud, 10.41 in L x 8.32 in W x 2.32 in THK, For Use With HF04 and HF05 Filter Fan, HG04 and HG05 Exhaust Grille, Mild Steel
MFR:
nVent
MFR #:
HH05GS61001
UPC:
783510350130
Item #:
424880
HH10GS61001 MCLA Filter Fan Shroud, 14.41 in L x 12.32 in W x 3-1/2 in THK, For Use With Model HF10, ST10 and TFP6 Filter Fan, HG10 and TFP6 Exhaust Grille, Mild Steel
MFR:
nVent
MFR #:
HH10GS61001
UPC:
783510350161
Item #:
428435
HH05GS35001 MCLA Filter Fan Shroud, 10.41 in L x 8.32 in W x 2.32 in THK, For Use With HF04 and HF05 Filter Fan, HG04 and HG05 Exhaust Grille, Mild Steel
MFR:
nVent
MFR #:
HH05GS35001
UPC:
783510350123
Item #:
434315
UU10080SP Ultrx UX1Y Swing Out Panel, 36.8 in L x 29 in W x 3/4 in H, For Use With ULTRX Type 4X 1025 x 825 mm Fiberglass Enclosures, 14 ga Steel
MFR:
nVent
MFR #:
UU10080SP
UPC:
783510347802
Item #:
264977
AS125 Hol-Sealers Hol-Tite A80HS Hole Seal, 1-1/4 in Conduit, 1.69 in Dia Hole, For Use With Conduit Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
AS125
UPC:
783510597405
Item #:
99827
ASPBG Hol-Sealers Hol-Tite A80HS Hole Seal, 0.88 in Dia Hole, For Use With 22.5 mm Pushbutton Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
ASPBG
UPC:
783510596903
Item #:
74580
AS200 Hol-Sealers Hol-Tite A80HS Hole Seal, 2 in Conduit, 2-1/2 in Dia Hole, For Use With Conduit Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
AS200
UPC:
783510597603
Item #:
81814
AS400 Hol-Sealers Hol-Tite A80HS Hole Seal, 4 in Conduit, 4.62 in Dia Hole, For Use With Conduit Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
AS400
UPC:
783510598006
Item #:
106826
CWHD5557 C2 Deep Hinged Concept Window Kit, 19.4 in H x 19.13 in W, 21.65 in H x 22.44 in W x 3.5 in D, For Use With CONCEPT 550 x 570 mm Operator Interface Enclosures, Steel, Medium Gray, Textured
MFR:
nVent
MFR #:
CWHD5557
UPC:
783510417109
Item #:
300850
PGS4K ProLine P20 Grounding Bar System, For Use With ProLine 600 mm D Front to Back Horizontal Frames, 9-Hole, 11 M6 Screws, 20-Hole and 20 M5 Screws, Copper
MFR:
nVent
MFR #:
PGS4K
UPC:
783510459895
Item #:
18583
PGS6K ProLine P20 Grounding Bar System, For Use With ProLine 800 mm D Front to Back Horizontal Frames, 15-Hole, 17 M6 Screws, 30-Hole and 31 M5 Screws, Copper
MFR:
nVent
MFR #:
PGS6K
UPC:
783510459994
Item #:
149085
AS350 Hol-Sealers Hol-Tite A80HS Hole Seal, 3-1/2 in Conduit, 4.12 in Dia Hole, For Use With Conduit Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
AS350
UPC:
783510597900
Item #:
66348
CWHD3136 C2 Deep Hinged Concept Window Kit, 9.96 in H x 10.86 in W, 12.2 in H x 14.17 in W x 3.31 in D, For Use With CONCEPT 310 x 360 mm Operator Interface Enclosures, Steel, Medium Gray, Textured
MFR:
nVent
MFR #:
CWHD3136
UPC:
783510416904
Item #:
324753
AS150 Hol-Sealers Hol-Tite A80HS Hole Seal, 1-1/2 in Conduit, 2 in Dia Hole, For Use With Conduit Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
AS150
UPC:
783510597504
Item #:
99852
AS100 Hol-Sealers Hol-Tite A80HS Hole Seal, 1 in Conduit, 1.38 in Dia Hole, For Use With Conduit Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
AS100
UPC:
783510597306
Item #:
69216
AS050 Hol-Sealers Hol-Tite A80HS Hole Seal, 1/2 in Conduit, 0.88 in Dia Hole, For Use With Conduit Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
AS050
UPC:
783510597009
Item #:
153642
ASPBLG Hol-Sealers Hol-Tite A80HS Hole Seal, 1-1/4 in Dia Hole, For Use With 30.5 mm Pushbutton Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
ASPBLG
UPC:
783510155827
Item #:
17712
ALGDSTOP2 A80 Enclosure Door Stop Kit, For Use With Standard, Large Mild and Stainless Steel Enclosures, Steel
MFR:
nVent
MFR #:
ALGDSTOP2
UPC:
783510501792
Item #:
14263
ASPB Hol-Sealers Hol-Tite A80HS Hole Seal, 1-1/4 in Dia Hole, For Use With 30.5 mm Pushbutton Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
ASPB
UPC:
783510597207
Item #:
155496
AS075 Hol-Sealers Hol-Tite A80HS Hole Seal, 3/4 in Conduit, 1.06 in Dia Hole, For Use With Conduit Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
AS075
UPC:
783510597108
Item #:
153654
CWHD4045 C2 Deep Hinged Concept Window Kit, 13.5 in H x 14.4 in W, 15.75 in H x 17.72 in W x 3.39 in D, For Use With CONCEPT 400 x 450 mm Operator Interface Enclosures, Steel, Medium Gray, Textured
MFR:
nVent
MFR #:
CWHD4045
UPC:
783510417000
Item #:
226023
AS250 Hol-Sealers Hol-Tite A80HS Hole Seal, 2-1/2 in Conduit, 3 in Dia Hole, For Use With Conduit Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
AS250
UPC:
783510597702
Item #:
21844
AS300 Hol-Sealers Hol-Tite A80HS Hole Seal, 3 in Conduit, 3.62 in Dia Hole, For Use With Conduit Hole, Steel, Light Gray/Polyester Powder Painted
MFR:
nVent
MFR #:
AS300
UPC:
783510597801
Item #:
7802
ASPB05075NM Hol-Sealers A80HS Non-Metallic Hole Seal, 1/2 in, 3/4 in Conduit, 0.86 in Dia Hole, For Use With Conduit Hole, Plastic, Textured
MFR:
nVent
MFR #:
ASPB05075NM
UPC:
783510163075
Item #:
395
ASPB100125NM Hol-Sealers A80HS Non-Metallic Hole Seal, 1 in, 1-1/4 in Conduit, 1.2 in Dia Hole, For Use With 30.5 mm Pushbutton Hole, Plastic, Textured
MFR:
nVent
MFR #:
ASPB100125NM
UPC:
783510163082
Item #:
73785