Power supply possible via the foot element (TBUS)
Error indication via diagnostic LED and analog signal
Input and output signals can be configured via DIP switches
Detailed Description: Phoenix contact MCR Resistance/potiposition transducer in green color has a voltage rating of 24 VDC and easily converts potentiometer positions as a percentage to an analog standard signal. Transducer with 100 Ohm - 100 kilo-Ohm input signal has output voltage rating of 0 - 10 Volts and output current rating of 0 - 20 milli-Amps. It has maximum output voltage rating of 12.5 Volts and maximum output current rating of 25 milli-Amps. DIP Switches are used to set output signal, automatic potentiometer, open circuit and fault evaluation detection. It is ideally designed for electrical isolation, conversion, amplification and filtering. It measures 102.5 mm x 93.1 mm x 6.2 mm. Transducer operates at a temperature of -20 to 65 deg C.
Amperage Rating | 25 Milli-Amp |
Application | For Conversion of Potentiometer Positions Into a Standard Analog Signal |
Brand | Phoenix Contact |
Cable Size | 26-12 AWG |
Connection | M3 Screw |
Height | 102.5 mm |
Input Signal | 100 Ohm - 100 kilo-ohm |
Item | Potiposition Transducer |
Length | 93.1 mm |
Mfr. # | 2864095 |
Output Signal | 12.5 Volt Voltage, 23 Milli-Amp Current, >10 kilo-ohm Load/Output Load Voltage Output, <500 Ohm Load/Output Load Current Output |
Standards | UL and cUL Listed, File #E238705 |
Temperature Rating | -20 to 65 deg C |
Type | MCR |
Voltage Rating | 24 Volt |
Width | 6.2 mm |