Conformal coated cadmium sulphide photocell resists effects of moisture and airborne contaminants. Photocell responds to the light spectrum near to that of a human eye sensor
Contacts remain closed between dusk and daw
Three color coded, minimum 6 Inch wire leads, 16 AWG, rated for 105 deg C
Fail Mode: On
Photocell responds to the light spectrum near to that of a human eye sensor
Detailed Description: NSI Tork® Photocontrol for 1/2-Inch conduit mounting features heavy duty die cast zinc housing and base. Photocontrol is of fixed position and is gasketed for maximum weather protection. It has delay of up to two minutes in order to avoid false switching due to light from passing vehicles and lightning. It has die case aluminum housing with gasketed for weather protection. Photocontrol finds application in Parking lot lighting, building perimeter lighting and outdoor signage. It has operating temperature ranging from -40 deg F to +140 deg F. It works with screw base CFLs and LED lamps while offering energy savings. Photocontrol is UL/cULus listed.
Application | Parking Lot-Building Perimeter-Outdoor Signage Lighting |
Brand | NSi |
Catalog Description | 1/2" Stem DieCast Alum, On 1-5fc/Off 3-15fc, 6"Leads, 120V, 2000W Tungsten, 1800VA Ballast, 600VA LED |
Enclosure | Die Cast Aluminum |
Environmental Conditions | -40 to + 140 F |
GTIN | 00786261600325 |
Height | 3.6500 |
Height Unit | IN |
Indicator | SPST |
Item Status | A |
Length | 1.4460 |
Length UOM | IN |
Mfr. # | 2115 |
Mounting | Conduit Mount |
Sensitivity | Turn On Is 1 to 5fc - Turn Off is 3 to 15fc |
Sensor | Cadmium Sulphide Cell |
Special Features | 1/2 Conduit Mount - Time Delay On And Off - Cadmium Sulphide Epoxy Coated 1/2 Diameter Cell |
Standard | cULus |
Supply Voltage | 120 VAC |
Type | Die Cast Aluminum Photocontrol |
UNSPSC | 39122236 |
Width | 1.9950 |
Width UOM | IN |