Size: 6.300 Inch Length x 2.600 Inch Width x 5.100 Inch Height
When connected to a 20 A circuit breaker, provides capacity on a 3-wire fluorescent dimmer for a full 16 A load of lighting.
May be used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode, or Lutron® Tu-Wire® lighting sources
Phase-adaptive technology automatically selects leading-edge or trailing-edge dimming for low voltage transformers
Up to 3 power modules may be controlled by a single dimmer
Compatible with 220/240 Volt non-CE systems (requires 120 V control input)
Not for use with non-dim loads
Detailed Description:
Lutron Grafik Eye® 3-Wire Fluorescent input phase-adaptive power module in white color when connected to a 20 Amps circuit breaker, provides 16 Amps/ 1920 - 4432 Watts capacity on a dimmer for a full 16 Amps load of lighting. The phase-to-neutral control power rating is 120 Volts and can withstand 120 Volts at 50/60 Hz. It includes two LEDs to note diagnostic information. It is compatible with 220/240 Volts non-CE systems, Lutron three-wire fluorescent dimmers, Grafik Eye® QS control units, Grafik Eye® 3000 series control units, LP, LCP, GP dimming panels, HomeWorks® remote power panels, Ecosystem® interface C5-BMJ-xxx.
Power module terminals can accommodate wires of size 2.5 sq.mm or two 12 AWG. Module measures 6.300 Inch x 2.600 Inch x 5.100 Inch. The operating temperature of module is 0 to 40 deg C. Phase-adaptive power module is surface or recess mounted for easy installation. In real time, RTISS circuitry compensates for incoming line voltage variations. Module defends temporary over-current and over-voltage conditions. The minimum load on power module is 10 Watts. It is used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode or Lutron Tu-Wire® lighting sources.
Phase-adaptive power module remunerates for ± 2% change in RMS voltage/cycle and ± 2% Hz change in frequency/second. Grafik Eye® Zone can accommodate wires up to three power modules for easy installation. Module provides air-gap off and defends temporary over-current and over-voltage conditions. Module has condensing relative humidity less than 90%. Phase-adaptive power module is UL listed and CSA certified.
Application | Lighting Control |
Brand | Lutron |
Catalog Description | Phase adaptive power module with 3-wire fluorescent input, 120V |
Cooling | Air |
Enclosure | Plastic |
Environmental Conditions | 0 to 40 degrees Celsius. Relative humidity less than 90% non-condensing. Indoor use only. |
Frequency Rating | 50 to 60 |
GTIN | 00027557624763 |
Height | 5.1 |
Height Unit | IN |
Input Voltage | 120 |
Insulation | Plastic |
Item Status | A |
Length | 2.6 |
Length UOM | IN |
Mfr. # | PHPM-WBX-120-WH |
Mounting | Surface or recess |
Output Voltage | 120 |
Special Features | When connected to a 20 A circuit breaker, provides capacity on a 3-wire fluorescent dimmer for a full 16 A load of lighting. May be used to dim incandescent, halogen, electronic low-voltage (ELV), magnetic low-voltage (MLV), neon/cold cathode, or Lutron Tu-Wire lighting sources. Phase adaptive technology automatically selects leading-edge or trailing-edge dimming for low-voltage transformers. Up to 3 power modules may be controlled by a single dimmer. Not for use with non-dim loads. Works with 120 VAC versions of Lutron 3-wire fluorescent dimmers, GRAFIK Eye QS and GRAFIK Eye 3000 Series control units. LP, LCP, and GP dimming panels, HomeWorks and HomeWorks QS remote power panels, and EcoSystem interface C5-BMJ-xxx. |
Standard | UL, RoHS, CSA, NOM, CIDET |
Type | Power Module, phase-adaptive, with 3-wire fluorescent input |
UNSPSC | 39121009 |
Width | 6.3 |
Width UOM | IN |