Stress control, specially formulated high-impulse material minimizes surface stress by uniformly distributing the electrical field over the entire surface of the insulator
Silicone rubber insulators and EPDM stress control tubes are compatible with all common solid dielectric insulations, such as polyethylene, cross-linked polyethylene (XLP) and ethylene propylene rubber (EPR)
110 Kilo-Volt basic insulation level
Detailed Description:
3M Non-skirted QT-II cold shrink termination kit includes three high-K, tracking resistance and silicone rubber terminations, nine strips Scotch ® mastic strip 2230, three Scotch ® electrical shielding tape 24, three strips Scotch ® self-fusing silicone rubber electrical tape 70, three 3M EMI copper foil shielding tape 1181 strips, three packs of silicone grease, one 3M cable cleaning preparation kit CC-2 and one instruction manual.
Kit ideal for terminating solid dielectric shielded 5 - 8-kilo-Volts tape shield, wire shield and Unishield ® power cables with conductor sizes 1, 1/0, 2, 2/0, 4, 6 AWG. It is also suitable for cables with 0.44 - 0.65-Inch outer diameter insulation. It consists of Hi-K stress control tube that is insulated with non-tracking silicone rubber insulator. Kit includes adequate material required for three single-phase terminations. Maximum installed length is 9.5 Inch.
Application | """Designed for terminating solid dielectric shielded power cable rated 5-15kV with ribbon shield, wire shield, and UniShield constructions""" |
Brand | 3M |
Catalog Description | 3MÖ Cold Shrink QT II 5620K & 5630K Series Termination Kit includes sufficient material to make 3, skirted terminations. Each kit has materials to make 3 single phase terminations for tape shield, wire shield and UniShield« power cables.. |
GTIN | 00054007122517 |
Height | 5.2000 |
Height Unit | IN |
Item Status | A |
Length | 14.4600 |
Length UOM | IN |
Mfr. # | 5622K |
Special Features | 1 kit per case |
Standard | IEEE |
Type | Cold Shrink QT-II Indoor Termination Kit |
UNSPSC | 26121648 |
Width | 6.6300 |
Width UOM | IN |