|Manufacturer:||Square D - Schneider Electric|
Schneider Electric / Square D Pumptrol XM Electromechanical pressure switch of size 10 bar is used to measure pressure of hydraulic oils, fresh water, seawater, air and corrosive fluids. It has an adjustable differential scale type for regulating between two thresholds. Pressure switching point is adjustable from 0.7 - 10 bar. Switch gives a possible differential of 0.57 bar at low settings and 0.85 bar at high settings at a maximum permissible pressure of 12.5 bar per cycle. It has a current rating of 0.1 Amp at 250 Volts, 1.5 Amps at 240 Volts and 3 Amps at 120 Volts.
Switch is provided with a zinc alloy enclosure for high strength and durability. It has a diaphragm pressure actuator and a local display for convenience. Switch has snap-action auxiliary contacts and silver contacts for high conductivity. It withstands a maximum permissible accidental pressure of 22.5 bar and a destructive pressure of 45 bar. It has C/O contact type and 1/4 Inch NPT female fluid connection type. Switch has screw-clamp terminals for electrical connection and an entry tapped, cable gland to accommodate cables of 7 - 13 mm.
Switch provides mechanical durability of 5000000 cycles. It measures 35 mm x 113 mm x 75 mm. It is included with a type gG, 10 Amps cartridge fuse for short circuit protection. Switch has four terminal block type. It operates at a temperature of -25 to 70 degree Celsius and can be stored at a temperature of -40 to 70 degree Celsius. Switch is IP66 rated for use in hazardous locations. Switch is UL listed, CSA certified and meets CE/EN/IEC standards.
|Application||-,REGULATION BETWEEN 2 THRESHOLDS|
|Catalog Description||Schneider Electric,PRESSURE SWITCH XML +OPTIONS,-,-13ªF to +158ªF (-25ªC to 70ªC),1/2 NPT Conduit Entrance - Screw Clamp Terminals,1/4 - 18 NPTF (female),10 bar,<= 120 (for temperature > 32ªF),Adjustable 8.26 to 108.75 psi,IP66 conforming to IEC/EN 60529,Nautilus,UL Listed File E164865 CCN NKPZ - CSA Certified File LR44087 Class 3211 03 - CE Marked,air (0...70 ¦C)-fresh water (0...70 ¦C)-hydraulic oil (0...70 ¦C),electromechanical pressure sensor|
|Conduit Connection||CABLE GLAND 7-13 MM|
|Contact Configuration||1 C/O|
|Decreasing Range||0.13-9.15 BAR|
|Increasing Range||0.7-10 BAR,7.5 BAR|
|Operating Cycles||120 CYC/MN|
|Operating Temperature||-25-70 AC|
|Process Connection||1/4IN - 18 NPTF (FEMALE)|
|Process Fluid||AIR 0-70 AC)-FRESH WATER 0-70 AC)-HYDRAULIC OIL 0-70 AC)|
|Ships Ground. Eligible for expedited shipping||Yes|
|Special Features||IP66 CONFORMING TO EN/IEC 60529,SCREW-CLAMPS TERMINALS 1 X 0.5...2 X 2.5 MM|
|Standard||EN/IEC 60947-5-1-CSA C22.2 NO 14-CE-UL 508,IP66 EN/IEC 60529,LROS (LLOYDS REGISTER OF SHIPPING)-CSA-CCC-BV-EAC-UL,CLASS I IEC 1140-CLASS I IEC 536-CLASS I NF C 20-030|
|System Pressure||10 BAR|
|Type||3 A, B300, AC-15 (UE = 120 V)EN/IEC 60947-5-1-1.5 A, B300, AC-15 (UE = 240 V)EN/IEC 60947-5-1-0.1 A, R300, DC-13 (UE = 250 V)EN/IEC 60947-5-1,ADJUSTABLE DIFFERENTIAL,ELECTROMECHANICAL PRESSURE SENSOR,ELECTROMECHANICAL PRESSURE SENSOR|