Schneider Electric / Square D XMLA300D2S13 Pumptrol Fixed Differential Pressure Switch; 300 bars, 1/4 Inch FNPT, 1 C/O, 6 Kilo-Volt, 10 Amp

Detailed Description: Schneider Electric / Square D Pumptrol XM Electromechanical pressure switch of size 300 bar is used to measure pressure of hydraulic oils, fresh water, seawater, air and corrosive fluids. It has a fixed differential scale type for detection of one single threshold. Pressure switching point is adjustable from 20 - 300 bar on rising pressure and 3.5 - 265 bar on falling pressure. Switch gives a possible differential of 16.5 bar at low settings and 35 bar at high settings at a maximum permissible pressure of 375 bar per cycle. It has a current rating of 0.1 Amp at 250 Volts, 1.5 Amps at 240 Volts and 3 Amps at 120 Volts.

Switch is provided with a zinc alloy enclosure for high strength and durability. It has a piston pressure actuator and a local display for convenience. Switch has snap-action auxiliary contacts and silver contacts for high conductivity. It withstands a maximum permissible accidental pressure of 675 bar and a destructive pressure of 1350 bar. It has C/O contact type and 1/4 Inch NPT female fluid connection type. Switch has screw-clamp terminals for electrical connection and an entry tapped for 1/2 Inch NPT cable gland to accommodate cables of 7 - 13 mm.

Switch operates at a rate of 60 cycles/minute and provides mechanical durability of 3000000 cycles. It measures 35 mm x 113 mm x 75 mm. It is included with a type gG, 10 Amps cartridge fuse for short circuit protection. It operates at a temperature of -25 to 70 degree Celsius and can be stored at a temperature of -40 to 70 degree Celsius. Switch is IP66 rated for use in hazardous locations. Switch is UL listed, CSA certified and meets CE/EN/IEC standards.