Schneider Electric / Square D ATV212HU55M3X Altivar 212 Variable Torque Speed AC Drive; 24.2 Amp, 3 Phase, 7.5 hp

Detailed Description: Schneider Electric / Square D Altivar 212 Speed AC drive is used to operate 7.5 hp power-rated asynchronous motor with supply voltage rating of 200 - 240 VAC at supply frequency range of 50/60 Hz. It has line current rating of 20.8 Amps at 200 Volts and 17.3 Amps at 240 Volts. The 3-Phase AC drive uses sensorless flux vector type controls for adjusting AC motor speed and torque. It has a control voltage of 24 VDC and voltage rating of 208/240 VAC. It is used to drive pump and fan motor in HVAC applications. It measures 7.090 Inch x 9.130 Inch x 6.690 Inch. Variable torque drive is provided with heat sink to use in normal environment and ventilated enclosure. Modbus, APOGEE FLN, LonWorks, METASYS N2 and BACnet protocol standards are integrated into the drive controller for connecting industrial network. It connects with network at a frequency of 47.5 - 63 Hz and transmits data at a rate of 9.6 - 19.2 kbps.

Driver has apparent power rating of 9.2 kVA for 240 Volts. It has continuous output current rating of 24.2 Amps at 230 Volts and maximum transient current rating of 26.6 Amps for about 60 seconds. It has speed rating of 1 - 10 RPM. Nominal switching frequency of drive is 12 kilo-Hz and output frequency rating is 0.5 - 200 Hz. It has ten variable speed levels with +/- 10% accuracy for adjusting motor rotation. Red color LED is provided to signal drive operation and has a frame size of 3. Driver has 2.5 Nm/0.6 Nm tightening torque terminals for accommodating 14 - 6 AWG conductors. Internal circuits of drive have supply voltage rating of 24 Volts with overload/short-circuit protection for safer operation. Drive is enclosed in IP55 enclosure that provides protection against external harsh environmental condition. Drive is enclosed in open type 1, IP20 enclosure that provides protection against external harsh environmental condition.

Driver has dielectric strength of 4230 VDC between control and power terminals, 2830 VDC between earth and power terminals. The 2-Wire drive features one RJ45 connector at one end and one open style connector at other end for easy external connection. It has vibration resistant of 1.5 GN, shock resistance of 15 GN and noise levels of 51 dB for consistent and reliable operation. It has three logic and two analog inputs and one analog, one NO/NC and one NO relay output. Driver has temperature rating of 0 to 40 deg C, storage temperature rating of -25 to 70 deg C and works within 95% relative humidity environment. AC drive is UL listed, CSA/CE certified, C-Tick/NOM/GOST approved, RoHS compliant and UL plenum rated.