Power circuits Application
Fluids Controlled Fresh or sea water, hydraulic oils
Liquid level control in Closed tanks For Condensate, return Heating Water, fuel, oil, etc
Snap action contacts HP rated Output
Closed tank Fluid Connection
UL Listed
CSA Certified
Detailed Description:
Schneider Electric / Square D 2-Pole Closed tank float switch has cast aluminum enclosure. The switch with power circuit, has motor power rating of 1.5 kilo-Watts/2 hp at 115 VAC and 2.2 kilo-Watts/3 hp at 230 VAC for 1 phase. It has 2 NC snap action DPST-DB form YY contact configuration. It has motor power rating of 2.2 kilo-Watts/3 hp at 115 VAC, 3.7 kilo-Watts/5 hp at 230 VAC, 0.75 kilo-Watt/1 hp at 460 VAC and 0.75 kilo-Watt/1 hp at 475 VAC for 3 phases. The switch has motor power rating of 0.18 kilo-Watt/0.25 hp at 32 VDC, 0.37 kilo-Watt/0.5 hp at 115 VDC and 0.37 kilo-Watt/0.5 hp at 230 VDC.
This screw-in bushing mountable switch has three knock-outs for 1/2-Inch conduit. It has insulation voltage rating of 575 Volts and contact rating of 120 -600 VAC, 125/250 VDC. It has four screw-clamp terminals connection that accommodates wire of size 10 AWG. Switch operates at a temperature of -22 to 220 degree Fahrenheit. It easily controls fluids like fresh/sea water, hydraulic oils and corrosive fluids at specific gravity of 0.85-Inch or higher. This switch is perfect for pressure control or monitoring of water pumps, compressors, molding presses and injection moulders. It is NEMA 1 rated. Switch is UL listed and CE certified.
Brand | Square D Pumptrol |
Catalog Description | Square D,FLOAT SWITCH 575VAC 1HP H +OPTIONS,-22...220 ¦F,2-Pole,2...5 in adjustable,575VAC,DPST,NEMA 7/9,Screw Clamp,Standard (Contacts Close on Liquid Rise),closed tank,float switch,liquid level control,screw-in bushing |
GTIN | 00785901075486 |
Height | 7.5000 |
Height Unit | IN |
Item Status | A |
Length | 13.8000 |
Length UOM | IN |
Mfr. # | 9037HR33 |
UNSPSC | 39122219 |
Width | 9.2000 |
Width UOM | IN |