Schneider Electric / Square D 9013FHG19J55 Pumptrol® Electromechanical Pressure Switch; Diaphragm, 220 psi (Destruction)

Detailed Description: Schneider Electric / Square D Pumptrol® Electromechanical pressure switch is used to control air in small electrically driven air compressors. It has a 9013FH pressure sensor of size 150 psi that switches OFF at 150 psi. Switch has rugged cast aluminum enclosure for durability. It has a nitrile diaphragm pressure actuator that can be operated from any position. It can be regulated between two thresholds. The four-terminal block switch is furnished with 5.261 sq.mm screw-clamp terminals and 10 AWG screw-clamp terminals for electrical connection. Switch has an adjustable pressure range of 70 - 150 psi at 30 psi differential.

Switch is provided with two NC, form YY, DPST-DB, snap-action contact type for high conductivity. It provides cable entry through two 0.88-Inch cable entries with 0.84-Inch across flats. It has a fixed differential scale type for internal settings and a 0.25-Inch NPT external fluid connection type. Switch is compatible with 3-Phase motors rated at 0.75 kilo-Watt at 575/460 VAC, 3-Phase motors rated at 2.2 kilo-Watts at 230 VAC, 3-Phase motors rated at 1.5 kilo-Watts at 115 VAC, 1-Phase motors rated at 1.1 kilo-Watts at 115 VAC and 1-Phase motors rated at 1.5 kilo-Watts at 230 VAC.

Switch operates at a rate of 10 cycles/minute and provides electrical durability of 100000 cycles at 10 cycles/minute with mechanical durability of 300000 cycles. It measures 2.780 Inch x 3.760 Inch x 3.920 Inch. It is included with a type gG, 20-Amps cartridge fuse for short circuit protection. Switch has a destruction pressure of 220 psi and gives a repeat accuracy of +/-3%. It operates and can be stored at a temperature of -33 to 257 deg F. Switch is NEMA 1 and IP20 rated for use in hazardous locations. Switch is UL listed, CSA certified and meets CE/ANSI standards.