Since there are two function shafts per level, all potential distribution tasks can be implemented
For a clear overview, each terminal point supports large-surface labeling
Tested for railway applications
DIN EN 50274 (VDE 0660-514):2002-11 Shock protection test specification
1.89 Kilo-Volt Power frequency withstand voltage setpoint, <=3.2 Milli-Volt voltage drop
1 N Setpoint, 10 N, 50 N, 60 N Tractive force setpoint
2.5 Sq mm, 4 Sq mm Conductor cross section short circuit testing
0.8 g, 5 g Acceleration
Detailed Description: Phoenix contact double-level terminal block in gray color features polyamide construction to offer enhanced durability and protection. It provide superior performance. It has M3 screws to provide DIN rail mounting for convenient installation and has large surface for labeling. Terminal block can accommodate a conductor of size 24 - 12 AWG for enhanced conductivity. It can withstand over a temperature of 130 deg C.
Amperage Rating | 24 Amp |
Application | For Railway Industry, Mechanical Engineering, Plant Engineering, Process Industry |
Brand | Phoenix Contact |
Conductor Range | 26-12 AWG |
Connection | M3 Screw |
Environmental Conditions | Inflammability Rated UL94 V-0, Pollution Degree: 3 |
Finish 2 | Gray |
Item | Double-Level Terminal Block |
Load Rating | 28 Amp (Lower Level) |
Material | Polyamide |
Mfr. # | 3044636 |
Mounting | DIN-Rail |
Number Of Positions | 4 Connection |
Number Of Terminals | 2 Level |
Size | 69.9 mm Length x 5.2 mm Width |
Standards | cULus Listed, CSA Certified |
Tightening Torque | 0.5 - 0.6 N-m |
Voltage Rating | 500 Volt |
Wire Strip Length | 9 mm |