All universal terminal blocks in the UK series can also be used in the Ex e area
The corresponding EC-type examination numbers for Ex approval
The corresponding EC-type examination numbers for Ex approval can be found in the technical connection data
DIN EN 50274 (VDE 0660-514):2002-11 Shock protection test specification
0.8 g, 5 g Acceleration
Detailed Description: Phoenix contact feed-thru terminal block is made of polyamide for durability. It has a voltage drop less than equal to 3.2 milli-Volts and 2 kilo-Volts power frequency to withstand a voltage set point of 5 N. It has 10 N, 80 N, 90 N tractive force set point, 6 sq.mm/10 sq.mm conductor cross section for short circuit testing and testing frequency of 5 - 150 Hz. Block has a surge voltage protection of 8 kilo-Volts, tightening torque of 1.5 - 1.8 Nm, pin spacing of 8.2 mm, current rating of 41 Amps, short-time current rating of 0.72 kilo-Amps/1.2 kilo-Amps and voltage rating of 800 Volts.
Amperage Rating | 57 Amp |
Brand | Phoenix Contact |
Conductor Range | 20-6 AWG Solid, 20-8 AWG Stranded |
Connection | M4 Screw |
Environmental Conditions | Inflammability Rated UL94 V-0, Pollution Degree: 3 |
Finish 2 | Gray |
Item | Feed-Through Terminal Block |
Load Rating | 76 Amp (With 16 Sq mm Conductor Cross Section) |
Material | Polyamide |
Mfr. # | 3005073 |
Mounting | DIN-Rail |
Number Of Positions | 2 Connection |
Number Of Terminals | 1 Level |
Size | 42.5 mm Length x 10.2 mm Width |
Standards | IEC 60947-7-1 |
Tightening Torque | 1.5 - 1.8 N-m |
Voltage Rating | 800 Volt |
Wire Strip Length | 10 mm |