Slim design
Efficient connection to system cabling using V8 adapter
Safe isolation according to DIN EN 50178 between coil and contact
RT III sealed relay
Integrated input circuit and interference suppression circuit
Functional plug-in bridges
Integrated input circuit and interference suppression circuit
consisting of base terminal block PLC-BSC.../21
Detailed Description: Phoenix contact ® Relay module features M3 screw thread and a yellow LED for indication. Module has nominal input voltage rating of 12 VDC and coil current rating of 15.3 milli-Amps. It has typical response time of five milli-seconds and release time of eight milli-seconds. Module features a protective circuit that has freewheeling damping diode to offer protection against polarity reversal. Module has SPDT contact type and contact side made of AgSnO material for durability. It has maximum switching voltage of 250 VAC/VDC and minimum switching voltage of 5 Volts at 100 milli-Amps. It can get required maximum inrush current on request and minimum switching current of 10 milli-Amps at 12 Volts.
Dimensions | 6.2 mm Width x 94 mm Depth x 80 mm Height |
Amperage Rating | 6 Amp Limiting Continuous, 10 Milli-Amp Switch |
Brand | Phoenix Contact |
Coil Rating | 15.3 Milli-Amp at 12 Volt DC |
Conductor Size | 26-14 AWG |
Connection | M3 Screw |
Contact Configuration | SPDT |
Contact Material | AgSnO |
Contact Rating | 10 Milli-Amp at 12 Volt Minimum Switching Current, 5 Volt at 100 Milli-Amp Minimum Switching Voltage, 250 Volt AC/DC Maximum Switching Voltage, 6 Amp Limiting Continuous Current |
Environmental Conditions | Pollution Degree: 3 |
Item | PLC Relay Module |
Mfr. # | 2966906 |
Mounting | Universal |
Release Time | 8 ms |
Response Time | 5 ms |
Standards | IEC 60664, EN 50178, IEC 62103 |
Temperature Rating | -40 to 60 deg C |