Slim design
Efficient connection to system cabling using V8 adapter
RT III sealed relay
Functional plug-in bridges
Safe isolation according to DIN EN 50178 between coil and contact
Integrated input circuit and interference suppression circuit
Detailed Description: "Phoenix contact PLC interface solid-state relay module features a yellow LED for indication and uses push-in connection. Relay has nominal input voltage rating of 24 VDC and current rating of 8.5 milli-Amps. It has voltage of less than or equal to 0.4 Volt at switching threshold ""0"" signal and greater than or equal to 0.8 Volt at switching threshold ""1"" signal. It operates at transmission frequency of 300 Hz and input voltage range of 0.8 - 1.2 Volts. Relay features freewheeling damping diode circuit to offer protection against polarity reversal. It has output voltage range of 3 - 48 VDC and 100 Amps of limiting continuous current. It has maximum voltage drop of less than or equal to 1 Volt at limiting continuous current."
Dimensions | 6.2 mm Width x 94 mm Depth x 80 mm Height |
Amperage Rating | 3.5 Milli-Amp |
Brand | Phoenix Contact |
Coil Rating | 120 Volt AC, 110 Volt DC Input, 3 - 33 Volt DC Output |
Conductor Size | 26-14 AWG |
Connection | M3 Screw |
Contact Rating | Limiting Continuous Current: 3 Amp |
Environmental Conditions | -25 to 70 deg C Storage/Transport Temperature, Pollution Degree: 2 |
Item | Relay Module |
Mfr. # | 2966650 |
Mounting | DIN-Rail |
Standards | UL and cUL Listed File # E238705, UL and cUL File # E172140, GOST Approved |
Temperature Rating | -25 to 60 deg C |
Type | Solid State |