Up to Cat4/PLe according to EN ISO13849-1, SILCL 3 according to EN62061, SIL 3 according to IEC61508
Manually monitored and automatic activation in a single device
Basic insulation
3 enabling current paths, 1 signaling current path
Single and two-channel control
Electromechanically forcibly guided, dust-proof
Approx. 50 Ohm Max. permissible overall conductor resistance
Detailed Description: Phoenix contact ® Safety relay features M3 screw thread to hold appropriately and a green LED to display the status. It is an electromechanically forcibly guided dust-proof relay that is ideally used for emergency stop and safety door monitoring. It operates at nominal voltage rating of 24 VAC/VDC and current rating of 140 milli-Amps AC/65 milli-Amps DC. It has typical response time of 20 milli-seconds, release time of 45 milli-seconds for single-channel and 10 milli-seconds for two-channel. It uses input voltage range of 0.85 - 1.1 Volts. Relay uses approximate voltage of 24 VDC at input/start and feedback circuit. It has approximately 50 Ohm of maximum permissible overall conductor resistance. Module operates at a temperature of -20 to 50 deg C.
Dimensions | 22.5 mm Width x 114.5 mm Depth x 99 mm Height |
Amperage Rating | 140 Milli-Amp |
Application | For Emergency Stop And Safety Door Monitoring |
Brand | Phoenix Contact |
Conductor Size | 12-24 AWG/KCMIL Solid/Stranded |
Connection | M3 Screw |
Contact Configuration | NO/NC |
Contact Material | AgSnO2 |
Contact Rating | 10 - 250 Volt AC/DC Switching Voltage, 6 Amp (N/O Contact)/5 Amp (N/C Contact) Limiting Continuous Current, 10 Milli-Amp - 6 Amp Inrush Current |
Degree Of Protection | IP20 |
Environmental Conditions | Pollution Degree: 2 |
Item | Safety Monitoring Relay |
Mfr. # | 2900509 |
Mounting | DIN-Rail |
Release Time | 45 ms (Single-Channel)/10 ms (Two-Channel) |
Resistance | 50 Ohm |
Response Time | 20 ms |
Standards | DIN EN 50178/VDE 0160 |
Temperature Rating | -20 to 50 deg C |
Voltage Rating | 24 Volt |