Dimension: 10.500 Inch Length x 7.250 Inch Width x 7.500 Inch Height
Direct contact allowed, no clearances are required
Socket is free floating and installs to eyeball, gimbal ring and trims equipped with socket brackets
Accepts 5/8 Inch - 1-3/8 Inch to accommodate various ceiling thicknesses
Socket clips directly to back of trim for perfect 90 degree vertical alignment of lamp socket
Socket is automatically positioned for optimum performance and lamp position consistency when socket is installed on trim or reflector
Electrical quick connector provided
Rated for direct contact with insulation
Detailed Description: Nora 5-Inch Line voltage housing has air-tight construction minimizes flow of air through the ceiling. Housing is ideal for insulated ceilings. It has socket clips to trim to offer immediate vertical lamp alignment. It has high quality 0.032 steel die cut one piece frame. Housing with riveted cap has 0.040 steel construction for added durability. It can be adjusted to a maximum ceiling thickness of 1-3/4 inches. Housing has gaskets to limit the airflow to less than 2CFM from room into ceiling plenum. Housing frame has two 13-3/4 to 24-1/2-Inch adjustable bar hangers with captive nails. Bar hangers are parallel to junction box. Junction box has 0.064-Inch thick galvanized steel construction and includes five 1/2-Inch, two 3/4-Inch knockouts, four Romex® pryouts and snap on covers. It can accommodate 18 AWG wires, where the ground wire is connected to the bottom. Housing has three quick connections for the insertion of 1/4-Inch stripped solid or thin standard conductors into connectors. The 5-Inch housing can accommodate a lamp that has a power rating of 75 Watts. Housing is UL listed.
Dimensions | 10.500 Inch Length x 7.250 Inch Width x 7.500 Inch Height x 5.625 Inch Ceiling Opening x 5 Inch ID |
Application | For Use In Insulated Ceilings |
Brand | Nora |
Catalog Description | Nora Lighting; New Construction Housing; IC; Wattage: 75 WTT; Lamp Type: Incandescent: 75PAR/R30, 50R/PAR20, 40A19; Number Of Lamps: 1; Lens: High Grade Frosted Dome; Fixture Material: Steel; Socket Type: Standard Medium Base Porcelain Socket; Mounting: Two Bar Hangers Are Included Adjustable To 24 IN, Bar Hangers Are Parallel To Junction Box, But Can Be Repositioned 90 DEG Perpendicular To Junction Box If Desired, Frame May Also Be Supported With Aircraft Structural Cable For Drop Panel Ceilings Or; Length: 10-1/2 IN; Width: 7-1/4 IN; Height: 7-1/2 IN; Inside Diameter: 5-1/2 IN; Ceiling Cut-out: 5-3/8 IN |
Ceiling Type | Insulated |
Construction | Steel |
Country Of Origin | USA |
Fixture Material | 0.04 IN Steel |
GTIN | 00732180461332 |
Height | 7-1/2 |
Item | 5 Inch Housing |
Lamp Type | 75 Watt 75PAR/R30, 50R/PAR20, 40A19 Incandescent |
Length | 10-1/2 |
Lens | High Grade Frosted Dome |
Mfr. # | NHIC-501QAT |
Mounting | Ceiling |
Number Of Lamps | 1 |
Socket Type | Standard Medium Base Porcelain Socket |
Special Features | Recessed 5 IN housings improve the appearance of standard height ceilings with their reduced aperture; Easy and quick to install and accept a wide variety of high quality, attractive finishing trims; Minimum clearances: Direct contact allowed, no clearances are required; Ceiling thickness: Accepts 5/8 - 1-3/8 IN to accommodate various ceiling thicknesses; Lamp position: Socket clips directly to back of trim for perfect 90 DEG vertical alignment of lamp socket; Socket is automatically positioned for optimum performance and lamp position consistency when socket is installed on trim or reflector; Bar hangers are adjustable from 13-3/4 - 24-1/2 IN with captive nails and can be repositioned 90 DEG; Junction box is listed for through branch circuit wiring and contains seven 1/2 IN knockouts and four Romex« with strain relief; Electrical: Quick connector provided; High quality 0.032 IN steel die cut one piece plaster frame; Bar hanger brackets on all four sides provide two possible positions for installations; 0.040 IN steel housing with riveted cap adjusts to maximum ceiling thickness of 1-3/4 IN; Constructed as spot welded cylindrical wrap capped with a riveted dome; Housing has factory installed gaskets to restrict airflow from room into ceiling plenum to <2 CFM in accordance with ASTM-283 air-tight requirements; Socket is free floating and installs to eyeball, gimbal ring and trims equipped with socket brackets; Protective cap included to protect socket interior during ceiling painting |
Standard | C/US UL Listed For Damp Location With Feed Through And For Wet Location (Only With Designated Trims), Washington State Approved, WSEC ASTM E283 For Air-Tight, NYC Approved |
Standards | cULus Listed |
Type | Line Voltage, Airtight |
Voltage Rating | 120 |
Wattage | 75 |
Width | 7-1/4 |