Dimension: 4.900 Inch Length x 1 Inch Width
2280 system lumens
Dims to 10% (5% for T4 ballasts)
100% performance tested at factory
Lamp current Crest factor is less than 1.7
Dimming range is 100% to 5% measured relative light output
55.5/57.6/57.9/57.1 Lumens/Watt system efficiency
0.83/0.86/0.87/0.86 relative efficiency
Detailed Description:
Lutron EcoSystem® 3D Compact studded dimming ballast has a voltage rating of 120/220/240/277 Volts. Ballast is compatible with T4 4-Pin quad-tube or triple tube and can operate two lamps of power rating 18 Watts. A-rated ballast operates silently and has a ballast factor of 0.95. Energy efficient ballast incorporates inrush current limiting circuitry to prevent circuit breaker tripping, switch arcing and relay failure. It features programmed starting method that ensures long lamp life. It maesures 4.900 Inch x 1 Inch.
Dimming ballast provides uniform lighting and is ideal for all industrial applications. Ballast features flicker-free dimming from 100% to 5% for T4 lamps. Ballast offers wide range of dimming level without going to full brightness. It has very low harmonic distortion throughout the entire dimming range and maintains consistent light output for different lamp lengths. Ballast incorporates end of life protection circuitry that ensures safe operation. Ballast is ideal for all general lighting fluorescent applications. The case has a temperature rating 75 deg C. Ballast is grounded by a mounting screw to the fixture. Ballast has high power factor greater than 0.95. Ballast is UL listed and CSA certified.
Amperage Rating | 0.34@120 V/0.18@220V/0.17@240V/0.15@277V |
Application | Lighting Control |
Ballast Factor | 0.95 |
Brand | Lutron |
Catalog Description | EcoSystem 5 percent 3-Wire and EcoSystem Digital Link Controlled T4 Compact, 2 lamps, ballast factor of 0.95, K-can, studded, 18W |
Dimmable | Dimmable |
Finish 2 | White |
Frequency Rating | 50/60 |
GTIN | 00027557638692 |
Height | 1.29 |
Height Unit | IN |
Item Status | A |
Lamp Type | T4 4-Pin Quad tube or Triple tube Fluorescent |
Length | 4.9 |
Length UOM | IN |
Mfr. # | EC3DT418KU2S |
Minimum Starting Temperature | 50 |
Mounting | Fixture |
Number Of Lamps | 2 |
Power Factor | Greater than 0.95 |
Special Features | Provides high-performance dimming for any compact fluorescent application. Offers continuous flicker-free dimming from 100% to 5 %, providing both energy savings and lighting flexibility. Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS with EcoSystem connection, PowPak dimming module with EcoSystem connection, and Quantum systems, allowing for integration into an existing/planned EcoSystem lighting control system. Supports standard 3-wire line-voltage phase control technology. Programmed rapid start design ensures full-rated lamp life while dimming and cycling. Lamps turn on to any dimmed level without flashing to full brightness. Low harmonic distortion throughout the entire dimming range. Frequency of operation ensures that ballast does not interfere with infrared devices. Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure. Ultr-quiet operation. Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground. End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life. Nonvolatile memory restores all ballast settings after power failure. 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls. 100% performance tested at factory. Custom ballast factors available. Design tool and specifications can be found at www.lutron.com/ballasttool |
Standard | UL, CSA, Class P thermal protected, ANSI, FCC |
Start Type | Rapid |
Thermal Protection | Class P |
Total Harmonic Distortion | Less than 10% |
Type | Ballast |
UNSPSC | 39101901 |
Voltage Rating | 120/220/240/277 |
Wattage | 18 |
Width | 3 |
Width UOM | IN |