Lutron PHPM-WBX-120-WH Grafik Eye® 3-Wire Fluorescent Input Phase-Adaptive Power Module; 120 Volt, 16 Amp, Surface Or Recessed Mounting, White

Detailed Description: Lutron Grafik Eye® 3-Wire Fluorescent input phase-adaptive power module in white color when connected to a 20 Amps circuit breaker, provides 16 Amps/ 1920 - 4432 Watts capacity on a dimmer for a full 16 Amps load of lighting. The phase-to-neutral control power rating is 120 Volts and can withstand 120 Volts at 50/60 Hz. It includes two LEDs to note diagnostic information. It is compatible with 220/240 Volts non-CE systems, Lutron three-wire fluorescent dimmers, Grafik Eye® QS control units, Grafik Eye® 3000 series control units, LP, LCP, GP dimming panels, HomeWorks® remote power panels, Ecosystem® interface C5-BMJ-xxx.

Power module terminals can accommodate wires of size 2.5 sq.mm or two 12 AWG. Module measures 6.300 Inch x 2.600 Inch x 5.100 Inch. The operating temperature of module is 0 to 40 deg C. Phase-adaptive power module is surface or recess mounted for easy installation. In real time, RTISS circuitry compensates for incoming line voltage variations. Module defends temporary over-current and over-voltage conditions. The minimum load on power module is 10 Watts. It is used to dim incandescent, halogen, electronic low-voltage, magnetic low-voltage, neon/cold cathode or Lutron Tu-Wire® lighting sources.

Phase-adaptive power module remunerates for ± 2% change in RMS voltage/cycle and ± 2% Hz change in frequency/second. Grafik Eye® Zone can accommodate wires up to three power modules for easy installation. Module provides air-gap off and defends temporary over-current and over-voltage conditions. Module has condensing relative humidity less than 90%. Phase-adaptive power module is UL listed and CSA certified.