Size: 6.300 Inch Length x 2.600 Inch Width x 5.100 Inch Height
Provides capability for a zone on a GRAFIK Eye® control unit (or other product) to dim a fully loaded circuit of lighting
May be used to control incandescent, electronic low-voltage, magnetic low-voltage and neon/cold cathode lighting sources, as well as Lutron® Tu-Wire® fluorescent dimming ballasts
Automatically selects leading-edge or trailing-edge dimming for low-voltage transformers
Provides power and dimming for one zone
Up to 3 power modules may be wired on a single GRAFIK Eye® zone
Not for use with non-dim loads
Detailed Description:
Lutron Grafik Eye® Phase-adaptive power module in white color is used to dim a fully loaded circuit of lighting for zone on a Grafik Eye® control unit or any other product. The phase-to-neutral control power rating is 120 Volts and can withstand 120/277 Volts at 50/60 Hz. Phase-adaptive power module mechanically selects leading/trailing-edge dimming to turn ON/OFF the electrical load at the end. It is compatible with Lutron three-wire fluorescent dimmers, Grafik Eye® 3000 series control units, LP, LCP and GP dimming panels and HomeWorks® remote power panels. The power rating of module is 2000/4500 Watts.
Output phase power of module is independent of control unit. It has 16 Amps capacity and terminals can accommodate wires of size 2.5 sq.mm or two 12 AWG. Module measures 6.300 Inch x 2.600 Inch x 5.100 Inch. The operating temperature of module is 0 to 40 deg C. Phase-adaptive power module is surface or recess mounted for easy installation. In real time, RTISS circuitry compensates for incoming line voltage variations. It can be used to control incandescent, electronic low-voltage, magnetic low-voltage and neon/cold cathode lighting sources, as well as Lutron Tu-Wire® fluorescent dimming ballasts.
Phase-adaptive power module load switches between forward phase/leading edge and reverse phase/trailing edge dimming for one zone. It remunerates for ± 2% change in RMS voltage/cycle and ± 2% Hz change in frequency/second. Grafik Eye® Zone can accommodate wires up to three power modules for easy installation. Module offers air-gap off and defends temporary over-current and over-voltage conditions. Module has non-condensing relative humidity less than 90% and maximum BTU/hour of module is 315. Phase-adaptive power module is UL listed and CSA certified.
Application | Lighting Control |
Brand | Lutron |
Catalog Description | 120/277V dual voltage phase control input phase-adaptive output power module, White finish only |
Cooling | Air |
Enclosure | Plastic |
Environmental Conditions | 0 to 40 degrees Celsius. Relative humidity less than 90% non-condensing. Indoor use only. |
Frequency Rating | 50 to 60 |
GTIN | 00027557533928 |
Height | 5.1 |
Height Unit | IN |
Input Voltage | 120 |
Insulation | Plastic |
Item Status | A |
Length | 2.4 |
Length UOM | IN |
Mfr. # | PHPM-PA-DV-WH |
Mounting | Surface or recess |
Output Voltage | 120 to 277 |
Special Features | Provides capability for a zone on a GRAFIK Eye control unit (or other product) to dim a fully loaded circuit of lighting. May be used to switch incandescent, electronic low-voltage, magnetic low-voltage, and neon/cold cathode lighting sources, as well as Tu-Wire fluorescent dimming ballasts. Automatically selects leading-edge or trailing-edge dimming for low-voltage transformers. Provides power and dimming for one zone. Up to 3 power modules may be wired on a single GRAFIK Eye zone. Not for use with non-dim loads. Works with 120 VAC versions of GRAFIK Eye QS and GRAFIK Eye 3000 Series control units. LP, LCP, and GP dimming panels, HomeWorks remote power panels, and Lutron 3-wire fluorescent dimmers. |
Standard | UL, RoHS, CSA, NOM, CIDET |
Type | Power Module, phase-adaptive |
UNSPSC | 39121009 |
Width | 6.3 |
Width UOM | IN |