Size: 4-9/10 Inch Length x 3 Inch Width x 1 Inch Height
Continuous, flicker-free dimming from 100% to 5%
Compatible With Ecosystem® energi savr nodetm unit, grafik Eye® Qs with Ecosystem® unit, powpaktm, dimming module with Ecosystem® unit and Quantum®, systems, allowing for integration into an existing/planned, ecosystem® lighting control system
Supports standard 3-wire line-voltage phase control, technology
Programmed rapid start design ensures full-rated lamp life while dimming and cycling, lamps turn on to any dimmed level without flashing to, full brightness
Low harmonic distortion throughout the entire, dimming range, frequency of operation ensures that ballast does not, interfere with Infrared devices
Inrush current limiting circuitry eliminates circuit breaker, tripping, switch arcing and relay failure, ultra-quiet operation
Less than 1.7 lamp current crest factor
Detailed Description:
Lutron EcoSystem® EcoSystem Digital ballast provides high-performance dimming for any compact fluorescent application, including lighting control within an EcoSystem. It is compatible with three wire fluorescent controls and EcoSystem digital controls. Programmed rapid start design ensures full-rated lamp life while dimming and cycling. It turns on to any dimmed level without flashing to full brightness. It features low harmonic distortion throughout the entire dimming range. It does not interfere with infrared device. Ballast has inrush current limiting circuitry that eliminates circuit breaker tripping, switch arcing and relay failure. It features ultra-quiet operation and is protected from miswiring of any input power to control lead/from lamp leads to each other/ ground.
Ballast has end-of-lamp-life protection circuitry that ensures safe operation throughout entire lamp life and non-volatile memory that retrieves all ballast settings after power failure. It measures 4-9/10 Inch x 3 Inch x 1 Inch. It operates at a voltage of 120/220 - 240/277 Volts at a frequency of 50/60 Hz. It offers 100% to 5% flicker-free dimming, providing both energy savings and lighting flexibility. Ballast and fixture must be grounded for proper dimming. It has a constant ± 2% light output variation for a line voltage variation of ± 10%. It has a minimum power factor of 0.95. It has a total harmonic distortion that is less than 10%. It is inaudible in a 27 dB ambient. Ballast has a maximum inrush current of 3 Amps at 277 Volts to 7 Amps at 120 Volts. It has a standby power that is less than 1 Watt.
The 4-Pin triple-tube ballast has a current rating of 0.29/0.12/0.14/0.15 Amp and an input power that is rated at 33.8/33.0/33.6/33.2 Watts. The 4-Pin quad-tube/triple tube has a current rating of 0.22/0.12/0.11/0.10 Amps and has an input power that is rated at 26.4/26.8/26.9/27.0 Watts. It has a minimum lamp starting temperature of 10 deg C and maximum ballast case temperature is 75 deg C. It has a relative non-condensing humidity that is less than 90%. It is class A sound rated. Ballast can be mounted using studs within a fluorescent fixture. It consists of one lamp. It has class P thermal protection. Ballast meets UL/CSA/FCC standards.
Amperage Rating | 0.22@120 V/0.12@220V/0.17@240V/0.15@277V, 26 W lamps. 0.29@120 V/0.15@220V/0.14@240V/0.12@277V, 32 W lamps. |
Application | Lighting Control |
Ballast Factor | 0.95 |
Brand | Lutron |
Catalog Description | EcoSystem 5 percent 3-Wire and EcoSystem Digital Link Controlled T4 Compact, 1 lamp, ballast factor of 0.95, K-can, studded, 26/32W |
Dimmable | Dimmable |
Finish 2 | White |
Frequency Rating | 50/60 |
GTIN | 00027557636759 |
Height | 1.29 |
Height Unit | IN |
Item Status | A |
Lamp Type | T4 4-Pin Quad tube or Triple tube Fluorescent |
Length | 4.9 |
Length UOM | IN |
Mfr. # | EC3DT4MWKU1S |
Minimum Starting Temperature | 50 |
Mounting | Fixture |
Number Of Lamps | 1 |
Power Factor | Greater than 0.95 |
Special Features | Provides high-performance dimming for any compact fluorescent application. Offers continuous flicker-free dimming from 100% to 5 %, providing both energy savings and lighting flexibility. Compatible with Energi Savr Node with EcoSystem devices, GRAFIK Eye QS with EcoSystem connection, PowPak dimming module with EcoSystem connection, and Quantum systems, allowing for integration into an existing/planned EcoSystem lighting control system. Supports standard 3-wire line-voltage phase control technology. Programmed rapid start design ensures full-rated lamp life while dimming and cycling. Lamps turn on to any dimmed level without flashing to full brightness. Low harmonic distortion throughout the entire dimming range. Frequency of operation ensures that ballast does not interfere with infrared devices. Inrush current limiting circuitry eliminates circuit breaker tripping, switch arcing, and relay failure. Ultr-quiet operation. Protected from miswires of any input power to control lead, or from lamp leads to each other and/or ground. End-of-lamp-life protection circuitry ensures safe operation throughout entire lamp life. Nonvolatile memory restores all ballast settings after power failure. 100% compatible with all Lutron 3-wire fluorescent controls and EcoSystem digital controls. 100% performance tested at factory. Custom ballast factors available. Design tool and specifications can be found at www.lutron.com/ballasttool |
Standard | UL, CSA, Class P thermal protected, ANSI, FCC |
Start Type | Rapid |
Thermal Protection | Class P |
Total Harmonic Distortion | Less than 10% |
Type | Ballast |
UNSPSC | 39101901 |
Voltage Rating | 120/220/240/277 |
Wattage | 26/32 |
Width | 3 |
Width UOM | IN |