Size: 1.750 Inch Width x 1.850 Inch Depth x 4.060 Inch Height
Provides automatic switching for two separate banks of fluorescent, incandescent, or low-voltage lighting from a single unit
Mounted at 4 ft, convenient dual pushbuttons provide manual-On/Off light switching of each load at any time, internal photocell
ODSOD-ID Conference Room Mode—primary and secondary relays switch lighting to last ON/OFF status when personnel enter room, providing a consistent lighting level from one occupancy period to the next. Both relays respond to Ambient Light Override, preventing lights from turning ON automatically during periods of ample natural light, for increased energy savings
ODS0D-ID Classroom Mode—both primary and secondary relays always switch lighting ON when personnel enter room, regardless of their ON/OFF status during last period of occupancy. Secondary relay only responds to Ambient Light Override—primary does not, ensuring that students and personnel never enter a darkened room
Exclusive walk-through feature provides increased energy savings by not leaving the lights On for an extended period after only momentary occupancy
Non adaptive mode disables self adjusting delayed Off time and walk-through feature in applications where these features are not desired
To comply with CEC Title 24, red LED indicator light flashes when PIR sensor detects motion to verify detection is active
Leviton Decora® 1-Pole Occupancy sensor in white color features dual push-buttons to provide manual ON/OFF light switching at any time. Sensor employs passive infrared detection technology to detect human presence in a room with Fresnel lens. The segmented Fresnel lens divides the field-of-view into sensor zones. Sensor detects the slight body movements with a minor motion area. The unit has a load rating of 800 Watts at 120 Volts, 1200/2700 VAC at 1200/2770 VA at 120/277 VAC. It has a voltage rating of 120/277 Volts at 60 Hz. Sensor has a presentation mode function for film/slide presentations. It allows push buttons to turn lights OFF and maintain them OFF when the room is occupied.
Sensor offers 180 deg field-of-view that covers approximately 2100 sq.ft making it ideal for commercial applications. Integral blinders can be placed on either side of the lens for adjustment between 180 deg and 60 deg of arc. Sensor measures 1.750 Inch x 1.850 Inch x 4.060 Inch. It is compatible with electronic/magnetic ballasts. LED Indicator light is included to display the active status of the sensor. The ambient light override ranges from 20 LUX to 500+ LUX to avoid lights from turning ON due to ample natural light.
Sensor comes with time delay adjustment for delayed-off time settings of 30 seconds, five minutes, 10 minutes and 30 minutes. It allows customized adjustments to optimize energy savings. A beep warn is included that allows sensor to beep three times after delayed-off time expires and waits 10 seconds before turning lights OFF. Sensor has a low-profile design and an elegant styling to complement any decor and co-ordinate Leviton's popular line of Decora® wiring devices. The dual relay in the sensor switches at zero crossing point of the AC power curve to maximize the contact life. It operates at a temperature of 0 to 50 deg C. Sensor is UL listed and cUL certified.
|Catalog Description||Dual-Relay, Decora Passive Infrared Wall Switch Occupancy Sensor, 180 Degree, 2100 sq. ft. Coverage, White|
|Environmental Conditions||Operating Temperature (0 to +50 DEG C);Storage Temperature (-10 to +85 DEG C);Humidity (20% to 90% Non-Condensing)|
|Power Consumption||110 @ 120V;277 @ 270V|
|Ships Ground. Eligible for expedited shipping||Yes|
|Size||46 H x 1.75 W x 1.83 D|
|Special Features||Provides Automatic Switching for Two Separate Banks of Fluorescent, Incandescent or Low-Voltage Lighting From a Single Unit, Convenient Dual Pushbuttons Provide Manual-ON/OFF Light Switching of Each Load at any Time, ODSOD-ID Conference Room Mode-Primary|
|Standard||cULus Listed;CEC Title 24 Compliant FCC Compliant|
|Type||Occupancy Sensor;Single-Pole Switch;Dual Relay|