Leviton 52120-M2 TVSS Surge Protective Device; 100 Kilo-Amp, 120/240 Volt AC, 1 Phase, 4-Wire

Detailed Description: Leviton 1-Phase Surge protection device features NEMA 12 powder coated steel outer enclosure that offers more durability. It is ideal for commercial application. Surge protection device can be panel mounted for easy connection. It has a voltage rating of 120/240 Volts. Surge protection device comes with 40 mm MOV design surge technology. It has recommended circuit breaker rating of 30 Amps. It has flammability rating of V-2 per UL94. It has a frequency rating of 50/60 Hz. Surge protection device operates at a temperature of -20 C to 40 C. It meaures 10.310 Inch x 5 Inch x 14.190 Inch.

Surge protection device has relative humidity of 5% to 95% non-condensing. It accommodates up to size 3 AWG dual wire that has parallel hardwire feed-through connection to offers good conductivity. Surge protection device features real-time diagnoses and provide the status of LEDs, audible alarm. It has dry contact remote monitoring NO/NC leads that are form C rated at 7 Amps with 240 VAC/30 VDC. Surge protection device includes maximum continuous operating voltage of line to neutral is 150 Volts, line to ground is 300 Volts, neutral to ground is 150 Volts and line to line is 300 Volts. It has three protection modes.

Surge protection device includes storage temperature of -4 deg F to 185 deg F. It has voltage protection rating of line to neutral is 1000 Volts, line to ground is 1500 Volts, neutral to ground is 700 Volts and line to line is 1500 Volts. Surge protection device includes nominal discharge current rating of 20 kilo-Amps. It has maximum surge current of 100 kilo-Amps per mode. Surge protection device includes short circuit current rating of 100 kilo-Amps. It has surge energy rating of 1900 Joules per phase. It has noise rejection of 20 dB to 40 dB at 5 kHz - 100 MHz. Surge protection device is CULUS listed and meets ANSI/NEMA standards.