Leviton 51120-1 Surge Protective Device; 120/240 Volt

Detailed Description: Leviton 1-Phase 2-Mode Surge protective device is used to offer protection against high-energy transient voltage surges that can cause damages to sensitive electronics such as computers and other electronic appliances. It can be used individually or as part of a coordinated application. Device with two-wire and a ground configuration finds its application in industrial, commercial and residential locations.

Device has a voltage rating of 120/240 VAC at frequency 50/60 Hz. Device with 40 mm MOV surge technology has a circuit breaker rating of 20 Amps, 120/24 Volts. It has a nominal discharge rating of 3 kilo-Amps and short circuit current rating of 10 kilo-Amps. Device has L-N MOC voltage of 150 Volts and L-L MOC voltage of 300 Volts. It features a maximum surge current of 50 kilo-Amps. It has L-N voltage protection rating of 800 Volts and L-L voltage protection rating of 1200 Volts. It has -6 db to -28 db EMI/RFI noise filtering at 100 KHz to 100 MHz.

Device is provided with LEDs to indicate the protection status. It measures 6 Inch x 6 Inch x 4 Inch. It operates at a temperature range of -10 to 60 deg C and can be stored at -20 to 85 deg C. Non-condensing device features relative humidity of 5% to 95%. It is features powder coated steel enclosure for good durability. It is cULus 1449 3rd Edition listed Type 2 agency certified and meets C-62.41 & C-62.45 ANSI/IEEE category A, B and C standards.