Sign in or register to view your pricing and inventory.

GE Lighting Controls RR7P Jasco GE RELAY

GE Lighting RR7P GE Lighting Controls RR7P Jasco GE RELAY
Made in USA
Manufacturer: GE Lighting
Mfr. #: RR7P
Item #: 74968
UPC: 043180541376
Login for Availability
Your Price:

Product Details

RR7P GE Lighting Controls RR7P Jasco GE RELAY

Product Specification

Amperage Rating 20
Brand GE Wiring Devices
Catalog Description GE Wiring Devices RR7P Standard 3-Wire Low Voltage Relay, 20 AMP, Contact Configuration: SPST, Contact Rating: Lamp Load: 125 VAC 20 AMP Tungsten Filament, 277 VAC 20 AMP Ballast, Resistive Load: 277 VAC 20 AMP, Motor Load: 1/2 HP At 110 - 125 VAC, 1-1/2 HP At 220 - 277 VAC, Mounting: Standard 1/2 IN Knockout, 1 Pole, Connection: 5-Pin Female, Resistance: 75 - 85 OHM At 60 HZ Unrectified, 55 - 60 OHM DC Resistance, Operating Cycles: 50000 Full Load, 100000 No Load, 0 - 60 DEG C Operating Temperature, Environmental Conditions: Relative Humidity: 10 - 95 PCT RH Non-Condensing, Atmosphere: Non-Explosive, Non-Corrosive, Vibration -Stationary Applications NEMA Level A (0.003 IN Amplitude, 1 G Acceleration), Lead Length: 6 IN, UL Listed, CSA Certified
Connection 5-Pin Female
Contact Configuration SPST
Contact Rating Lamp Load: 125 VAC 20 AMP Tungsten Filament, 277 VAC 20 AMP Ballast, Resistive Load: 277 VAC 20 AMP, Motor Load: 1/2 HP At 110 - 125 VAC, 1-1/2 HP At 220 - 277 VAC
Country Of Origin USA
Environmental Conditions Relative Humidity: 10 - 95 PCT RH Non-Condensing, Atmosphere: Non-Explosive, Non-Corrosive, Vibration -Stationary Applications NEMA Level A (0.003 IN Amplitude, 1 G Acceleration)
GTIN 00043180570970
Mfr. # RR7P
Mounting Standard 1/2 IN Knockout
Number Of Poles 1
Operating Cycles 50000
Operating Temperature 0 - 60
Resistance 75 - 85 OHM At 60 HZ Unrectified, 55 - 60 OHM DC Resistance
Special Features Mechanical latching-type units requiring only momentary 24 V rectified AC switch circuit pulses to open or close line-voltage circuits; Employs a split low-voltage coil to move the line voltage contact armature to the ON ( OFF) latched position; The ON coil moves the armature to the right when a 24 VAC control signal is impressed across its leads; This is analogous to a magnet attracting the handle of a standard single pole switch to the ON position when energized; The armature (handle) latches in the ON position and will remain there until the OFF coil is energized, drawing the armature into the OFF position; This control operation provides several key control features: positive action, stable operation, minimal power consumption, additive control functions; May be used to full-rated capacity for tungsten filament, ballast or resistive loads; Do not use this relay to switch DC loads, this will damage the power contacts; Operates in any position; Split coil (1/2 for on, 1/2 for off), compatible with standard interface/drivers, ULN-2003A darlington transistor arrays, operating voltage - nominal: 24 - 29 VAC (plus/minus 10 PCT) rectified, (minimum at relay - 21 VAC rectified), 30 - 38 VDC (plus/minus 10 PCT) filtered, momentary duty rating, minimum activating pulse time: 50 MILSEC, impedance: 75 - 85 OHM at 60 HZ unrectified, 55 - 60 OHM DC resistance, for proper operation, use only half-wave rectified AC voltage for relay control; 0.865 - 0.875 IN (nominal 22 MM) diameter In 14 or 16 AWG material; Two terminals, two back wiring holes per terminal for feed-through wiring, screw-actuated clamps for use with 14 - 10 AWG solid or stranded wire, copper wire only
Standard UL Listed, CSA Certified
Type Standard 3-Wire Low Voltage Relay