Size: 7.350 Inch Length x 3.410 Inch Width x 1.250 Inch Height
25% manual step plus Auto step and Auto ramp on Milli-Amp output
Continuity: Beeps for resistance < 100 ohms
Battery life- 50 Hours typical (measurement), 12 Hours typical (sourcing 12 Milli-Amp)
Over-voltage category is IEC 1010-1 CAT III
Detailed Description: Fluke Process meter measuring 7.350 Inch Length x 3.410 Inch Width x 1.250 Inch Height is designed to troubleshoot and measure electrical quantities in high-tech commercial/industrial circuit. It measures AC/DC voltage between 0 - 1000 Volts. It is design to check AC/DC current rating from 0 -1 Amp. Multimeter has min, max and average options for accurate measurement. It has backlit LCD display for operating device in low light environment. It measure 32 mm x 87 mm x 187 mm. Multimeter LCD displays 4000 count for maximum value readout. True RMS sensing multimeter ensures accurate, error free values. Multimeter comes with fast acting fuse that withstands voltage rating of 1000 Volt and current rating from 450 milli-Amps for overload protection. Process meter is used to measure 0 to 40 mega-Ohms circuit resistance and 0 - 99.99 kHz frequency. Diode test mode in multimeter tests for general purpose germanium, silicon and power diodes. Multimeter is powered by 9 Volts alkaline battery with 50 hours typical battery life. It operates within temperature range of -20 to 55 deg C and stored within temperature of -40 to 60 deg C. It has an audible beeper to signal continuity of cable or circuit. It is encased in a yellow colored holster and includes alligator clips, test lead as well as battery. Multimeter has IEC 1010-1 CAT III rated design for safer operation.
Brand | FLUKE |
Catalog Description | Fluke 787 ProcessMeterÖ. Double your power. A maintenance and calibration tool that will be at home in every instrumentation technician's tool box, the Fluke 787 ProcessMeterÖ combines a DMM and a Loop Calibrator in one rugged, handheld tool, for about what you would expect to pay for a loop calibrator alone. Based on the trusted Fluke 87 DMM, the 787 adds the ability to measure, source, and simulate dc loop current with 0.05 accuracy and 1 microamp resolution. |
GTIN | 00095969048323 |
Height | 2.5200 |
Height Unit | IN |
Item Status | A |
Length | 9.5300 |
Length UOM | IN |
Mfr. # | FLUKE-787 |
UNSPSC | 41113630 |
Width | 4.5300 |
Width UOM | IN |