Dimension: 9 Inch x 3.100 Inch x 1.900 Inch
True, RMS measurements for accurate AC voltage and current measurements
Built-in non-contact Voltage detector with LED alert
40000 count multimeter functions for DC voltage, resistance, capacitance and frequency for high resolution over wider ranges
Auto ranging with manual override
8 to 1 distance to target ratio
Includes Cat III 600 Volt, Double Molded Test Leads, 9 Volt Battery, Two Type K Bead Wire Probes And Case
Built-in dual thermocouple inputs
FLIR (Extech) AC/DC Clamp-on meter with NCV detector and infrared thermometer measures motor capacitors to 40,000µF. It has a dual type K thermocouple inputs with differential temperature function (T1, T2, T1-T2) for easier superheat and sub-cooling temperature measurements. It has data hold and fast peak hold of current surges during motor startup with a rugged double molded housing. It has a 1.25-Inch jaw opening for conductors up to 500 MCM and an operating temperature of -50 to 1000 deg C. Clamp-on meter has true RMS measurements for accurate AC Voltage and Current values. It has an auto power OFF with audible alert and disable function.
Clamp-on meter has an autoranging with manual override and a DCµA multimeter function for HVAC flame rod Current measurements. It measures an AC/DC current rating of 400 Amps and measures 9 Inch x 3.100 Inch x 1.900 Inch. The clamp-on meter has a maximum resolution of 10 milli-Amps and a basic ACA accuracy of +/- 1.5 %. It measures resistance of 40000 Mega-Ohm with a resolution of 0.01. Clamp-on meter measures a frequency of 0.001 Hz and a duty cycle of 0.5 to 99.0 %. It measures a capacitance of 10 pF to 40000µF with a resolution of 0.01 nF. It measures a maximum AC/DC Voltage of 600 Volts with a resolution of 0.1 milli-Volts.
|Amperage Rating||400A AC/DC|
|Application||Quickly check for the presence of live wires before testing and measure the temperature|
|Catalog Description||AC DC Clamp-on meter with built-in dual Thermocouple inputs, NCV Detector and InfraRed Thermometer|
|Type||400A Dual Input AC/DC Clamp Meter + NCV + IR Thermometer|