Detailed Description: SM2A912LVQD BANNER VALU-BEAM 912 PHOTOELECTRIC SENSOR
Brand | Banner |
Catalog Description | VALU-BEAM 912 Series Non-Polarized Retroreflective Mode Photoelectric Sensor,24 - 250 VAC,Sensing Range: 0.15 - 9 MR,650 NMTR Visible Red Sensing Beam,Output: SPST SCR Solid-State 2-Wire Minimum Load Current: 10 MILAMP Maximum Steady-State Load Capabili |
Connection | 3-Pin Mini-Style Quick Disconnect |
Country Of Origin | USA |
Enclosure | IEC IP66 NEMA 1, 2, 3, 3S, 4, 4X, 12 and 13 Reinforced Thermoplastic Polyester |
Environmental Conditions | 90 PCT At 50 DEG C Relative Humidity |
GTIN | 00662488265779 |
Leakage Current | Off-State Output: Less Than 1.7 MILAMP |
Lens | Acrylic |
Mfr. # | SM2A912LVQD |
Operating Temperature | -20 To 70 |
Output | SPST SCR Solid-State 2-Wire; Minimum Load Current: 10 MILAMP; Maximum Steady-State Load Capability: 750 MILAMP to 50 DEG C, 500 MILAMP to 70 DEG C; Inrush Capability: 4 AMP for 1 S (Non-Repetitive); On-State Voltage Drop: Less Than or Equal To 5 V RMS at 750 MILAMP Load And Less Than or Equal To 10 V RMS at 15 MILAMP Load |
Response Time | 4 |
Sensing Beam | 650 NMTR Visible Red |
Sensing Range | 0.15 - 9 |
Size | 36.6 MM Length X 35.6 MM Width X 77.5 MM Height |
Special Features | Protected against transient voltages and false pulse on power-up; Stainless steel hardware; 912 Series ac sensors can be destroyed from overload conditions; Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load; The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts; Potentiometer located at rear of sensor |
Standard | C/US RU And CSA Listed, CE |
Type | 912 Series Non-Polarized Retroreflective Mode Photoelectric Sensor |
Voltage Rating | 24 - 250 |