Sign in or register to view your pricing and inventory.

Banner SM2A912DQD Sensor

  • Branom Instruments SM2A912DQD Banner SM2A912DQD Sensor
Manufacturer: Branom Instruments
Mfr. #: SM2A912DQD
Item #: 473416
UPC: 662488265700
Login for Availability
Your Price:

Product Details

Detailed Description: SM2A912DQD BANNER VALU-BEAM 912 PHOTOELECTRIC SENSOR

Product Specification

Brand Banner
Catalog Description VALU-BEAM 912 Series Diffuse Mode Photoelectric Sensor,24 - 250 VAC,Sensing Range: 760 MM,880 NMTR Infrared Sensing Beam,Output: SPST SCR Solid-State 2-Wire Minimum Load Current: 10 MILAMP Maximum Steady-State Load Capability: 750 MILAMP to 50 DEG C, 50
Connection 3-Pin Mini-Style Quick Disconnect
Country Of Origin USA
Enclosure IEC IP66 NEMA 1, 2, 3, 3S, 4, 4X, 12 And 13 Reinforced Thermoplastic Polyester
Environmental Conditions 90 PCT At 50 DEG C Relative Humidity
GTIN 00662488265700
Leakage Current Off-State Output: Less Than 1.7 MILAMP
Lens Acrylic
Mfr. # SM2A912DQD
Operating Temperature -20 To 70
Output SPST SCR Solid-State 2-Wire; Minimum Load Current: 10 MILAMP; Maximum Steady-State Load Capability: 750 MILAMP to 50 DEG C, 500 MILAMP to 70 DEG C; Inrush Capability: 4 AMP for 1 S (Non-Repetitive); On-State Voltage Drop: Less Than or Equal To 5 V RMS at 750 MILAMP Load And Less Than or Equal To 10 V RMS at 15 MILAMP Load
Response Time 4
Sensing Beam 880 NMTR Infrared
Sensing Range 760
Size 36.6 MM Length X 35.6 MM Width X 77.5 MM Height
Special Features Protected against transient voltages and false pulse on power-up; Stainless steel hardware; 912 Series ac sensors can be destroyed from overload conditions; Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load; The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts; Potentiometer located at rear of sensor
Standard C/US RU And CSA Listed, CE
Type 912 Series Diffuse Mode Photoelectric Sensor
Voltage Rating 24 - 250