Stoneway Electric
Contact Us Ask a Pro
Checkout View Cart 0
  1. Home
  2. Control & Automation
  3. Sensors & Accessories
  4. Sensor Accessories
  5. Branom Instruments SM2A312D
Sign in or register to view your pricing and inventory.

Banner SM2A312D Mini-Beam Sensor

  • Branom Instruments SM2A312D Banner SM2A312D Mini-Beam Sensor
Manufacturer: Branom Instruments
Mfr. #: SM2A312D
Item #: 447528
UPC: 662488259655
Login for Availability
Your Price:

Product Details

Detailed Description: SM2A312D BANNER MINI-BEAM: DIFFUSE; RANGE: 380 MM; INPUT: 24-240V AC; OUTPUT: SPST SOLID-STATE 2-WIRE; 2 M (6.5 FT) CABLE

Product Specification

Brand Banner
Catalog Description MINI-BEAM Self-Contained Diffuse Mode Photoelectric Sensor,24 - 240 VAC,Sensing Range: 380 MM,880 NMTR Infrared LED Sensing Beam,Output: SPST SCR Solid-State 2-Wire Minimum Load Current: 5 MILAMP Maximum Steady-State Load Capability: 300 MILAMP to 50 DE
Connection 2 MR Cable
Country Of Origin USA
Enclosure IEC IP67 NEMA 1, 2, 3, 3S, 4, 4X, 12 and 13 Thermoplastic Reinforced VALOX
Environmental Conditions 90 PCT At 50 DEG C Relative Humidity
GTIN 00662488259655
Leakage Current Off-State Output: Less Than 1.7 MILAMP
Lens Acrylic
Mfr. # SM2A312D
Operating Temperature -20 To 70
Output SPST SCR Solid-State 2-Wire; Minimum Load Current: 5 MILAMP; Maximum Steady-State Load Capability: 300 MILAMP to 50 DEG C, 100 MILAMP to 70 DEG C; Inrush Capability: 3 AMP for 1 S (Non-Repetitive), 10 AMP For 1 Cycle (Non-Repetitive); On-State Voltage Drop: Less Than or Equal to 5 V at 300 MILAMP Load And Less Than or Equal to 10 V at 15 MILAMP Load
Response Time 8
Sensing Beam 880 NMTR Infrared LED
Sensing Range 380
Size 65.8 MM Length X 12 MM Width X 33.3 MM Height X 18 MM Barrel Diameter
Special Features Rectangular with M18 barrel housing style; Protected against transient voltages, false pulse on power-up; Controls are located on the rear panel of the sensor and are protected by a gasketed, clear acrylic cover; Totally encapsulated, O-ring sealing, stainless steel screws construction; Overload conditions can destroy ac MINI-BEAM sensors. Directly wiring sensor without load series, across hot and neutral will damage sensor (except emitter models); Low-voltage use requires careful analysis of the load to determine if the sensorÆs leakage current or on-state voltage will interfere with proper operation of the load; The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts; Controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cove
Standard RU And CSA Listed, CE
Type Self-Contained Diffuse Mode Photoelectric Sensor
Voltage Rating 24 - 240