Detailed Description: RPBA BANNER POWER BLOCK,105 - 130 VAC,2 WTT,50/60 HZ
Application | For MAXI-BEAM Sensors |
Brand | Banner |
Catalog Description | Banner Power Block,105 - 130 VAC,2 WTT,50/60 HZ,Mounting: Wiring Chamber,Output: SPST Solid-State Relay, 3/4 AMP Maximum (Derated to 1/2 AMP at 70 DEG C) Maximum Inrush: 10 AMP for 1 S or 30 AMP for 1 AC Cycle (Non-Repeating) On-state Voltage Drop: Less |
Country Of Origin | USA |
Frequency Rating | 50/60 |
GTIN | 00662488255459 |
Mfr. # | RPBA |
Mounting | Wiring Chamber |
Special Features | Power block is intended to switch the same ac voltage as is used to power the MAXI-BEAM, however both can switch any ac voltage that is lower than the supply voltage, as long as both AC circuits share a common neutral; Range depends on sensor; 4-Wire operation; These blocks are designed to handle the inrush current of AC inductive loads like motor starters and solenoids; There is no minimum load requirement, and they will interface directly to inputs of all AC programmable logic controllers (PLCs) |
Standard | UL And CSA Listed |
Type | Power Block |
Voltage Rating | 105 - 130 |
Wattage | 2 |