Explosion proof, dust-ignition proof and raintight
Smooth, rounded integral bushing in each hub
Accurately tapped, tapered threads for tight
Allow up to 40% conduit fill in compliance with the National Electrical Code (NEC)
Detailed Description:
Appleton Unilet® Conduit sealing fitting has smooth, rounded integral bushing in each hub to safeguard conductor insulation. It has accurately tapped, tapered threads for tight, rigid joints and ground continuity. This sealing fitting has large opening for damming and filling. It is explosion-proof, dust-ignition-proof and rain-tight. It features almag 35 aluminum construction with epoxy powder coating.
The sealing fitting is suitable for use with threaded rigid metal conduit and IMC. It prevents passage of gases, vapors or flames from one portion of conduit system to another. It measures 1.75 Inch x 4.31 Inch. Sealing fitting has a trade size of 3/4 inch and bending radius of 1.38 inches. Sealing fitting is UL listed and CSA certified.
Application | For Use With Threaded Rigid Metal Conduit and IMC |
Brand | Appleton |
Catalog Description | UNILETS EY Series 40 PCT Expanded Fill Vertical And Horizontal Conduit Sealing Fitting, Size: 3/4 IN, Material: Almag 35 Aluminum, Finish: Epoxy Powder Coat, Connection: Female Threaded, Turning Radius: 1.38 IN, Length: 4.31 IN, Width: 1-3/4 IN, Standard: UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181, UL Listed For Class I, Groups A, B, C, D, Class II, Groups E, F, G, And Class III, For Use With Threaded Rigid Metal Conduit and IMC |
Connection | Female Threaded |
Finish | Epoxy Powder Coat |
GTIN | 00781381809917 |
Height | 0.9400 |
Height Unit | IN |
Item Status | A |
Length | 8.1000 |
Length UOM | IN |
Material | Almag 35 Aluminum |
Mfr. # | EYSEF75AL |
Size | 3/4 |
Special Features | For preventing passage of gases, vapors or flames from one portion of conduit system to another; Required in Class I, Division 1 and 2 locations within 18 IN of enclosures containing apparatus that may cause arcs, sparks or high temperatures; Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps; Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location; Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 IN or less conduit, seal must be located within 18 IN of either enclosure; Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations; Explosionproof, dust-ignitionproof, raintight; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; A |
Standard | UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181, UL Listed For Class I, Groups A, B, C, D; Class II, Groups E, F, G; And Class III |
Type | EY Series 40 PCT Expanded Fill Vertical And Horizontal Conduit Sealing Fitting |
UNSPSC | 39121311 |
Width | 5.0000 |
Width UOM | IN |