Dimension: 10-3/16 Inch Overall Length x 3-5/8 Inch Body Dia
Explosionproof and dust-ignition proof
To seal and drain vertical conduits
Threaded for rigid conduit or IMC
Large cover opening for easy packing of fiber dam on 1-1/4 Inch through 4 Inch sizes
Can be used with appleton Kwiko A or crouse-hinds chico sealing compound
Provides continuous water drain path while allowing conduit run to breathe, in compliance with the NEC
25% conductor fill
Detailed Description: Appleton Sealing unilet with drain is explosionproof and dust-ignition proof that made of malleable iron for ultimate durability and strength. Unilet in epoxy powder coated dichromate zinc electroplated finish has turning radius 2.69 Inch. It measures 10-3/16 Inch overall x 3-5/8 Inch body diameter. Unilet features male/female connection and vertical mounting position. It has enclosure that is rated at class I group C D, class II group E G F, class III and is ideal for use with threaded rigid metal conduit and IMC. Unilet is designed to seal and drain vertical conduits. It is UL listed and CSA certified.
Application | For Use With Threaded Rigid Metal Conduit and IMC |
Brand | Appleton |
Catalog Description | UNILETS EYDM Series 25 PCT Fill Vertical Conduit Drain Sealing Fitting With Removable Nipple, Size: 2-1-/2 IN, Material: Malleable Iron, Finish: Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat), Connection: Tapered MNPT X T |
Connection | Tapered MNPT X Tapered FNPT |
Finish | Triple-Coat (Zinc Electroplate, Chromate And Epoxy Powder Coat) |
GTIN | 00781381230193 |
Height | 3.6000 |
Height Unit | IN |
Item Status | A |
Length | 9.0000 |
Length UOM | IN |
Material | Malleable Iron |
Mfr. # | EYDM250 |
Size | 2-1-/2 |
Special Features | For preventing passage of gases, vapors or flames from one portion of conduit system to another; Required in Class I, Division 1 and 2 locations within 18 IN of enclosures containing apparatus that may cause arcs, sparks or high temperatures; Required in Class I, Division 1 and 2 locations where 2 IN or larger conduit enters enclosure, fitting housing terminals, splices or taps; Required in Class I, Division 1 and 2 locations at the boundary where conduit leaves classified location; Required in Class I, Division 1 and 2 locations where two or more enclosures are connected by 36 IN or less conduit, seal must be located within 18 IN of either enclosure; Required where cables (which exceed rate of gas or vapor transmission permitted for seals) are used in Class I, Division 2 locations; Explosionproof, dust-ignitionproof, raintight; Smooth, rounded integral bushing in each hub protects conductor insulation; Accurately tapped, tapered threads for tight, rigid joints and ground continuity; U |
Standard | UL 886 (1203), UL File Number E10444, CSA C22.2 No. 30, CSA 065181, UL Listed For Class I, Groups B, C, D; Class II, Groups E, F, G; And Class III |
Type | EYDM Series 25 PCT Fill Vertical Conduit Drain Sealing Fitting With Removable Nipple |
UNSPSC | 39121311 |
Width | 5.3000 |
Width UOM | IN |