Size: 1.750 Inch Depth
The excellent contact press provided by the steel clamp
Any conductor creep compensated by the resilience of the clamp
Connection of solid or stranded wires
ABB Entrelec® Standard M4/8 feed-through terminal block in gray color features two terminals and din 1 - 3 rail mounting. Ground terminal block has current rating of 41 Amps and voltage rating of 600 Volts. It features 8.000 mm pitch spacing and operates under pollution degree 2. Feed through sectional terminal block has a depth of 1.750 inches and can accommodate solid/stranded wire of size 22 - 8 AWG. It features a wire strip of length 0.47 Inch and A5 gauge. Corrosion-proof terminal block is highly resistant to thread destruction and dichromate zinc surface. Terminal block has polyamide insulation and an end plate.
Terminal block has a non symmetrical construction to prevent risk of short-circuit between two blocks. It is provided with a locking pin to eliminate any risk of mistake during assembly. Terminal block has a screwdriver of size 4 mm and tightening torque of 7.1 - 8.9 Inch-lb. It has a UL94V0 flammability rating to withstand environmental conditions. Terminal block is CSA, IEC, NFC/VDE certified and UL listed.
|Catalog Description||Gray, feed through terminal block with 8 mm spacing, 50 Amp rated UL current with screw clamp connection that accepts 22-8 AWG UL wire range|