Dimension: Cable Diameter: 0.100 - 0.820 Inch, Connector Length: 3 Inch, Relaxed Tube Length: 8 Inch
Open-ended, tubular, rubber sleeves which are factory expanded and assembled onto a removable core
The core is removed after the tube has been positioned for installation over an inline connection, terminal lug, etc allowing the tube to shrink and form a water-resistant seal
Simple installation, requires no tools
No torches or heat required, good thermal stability
Excellent wet electrical properties
Improved, tougher rubber formulation to withstand backfilling
Water resistant
Detailed Description: 3M Cold shrink connector insulator in black color is made of specially formulated EPDM material to provide permanent, durable environment sealing and insulation. It can accommodate 10 - 1/0 AWG copper and aluminum wires of 0.100 - 0.820 Inch. Connector insulator has a voltage rating of 1000 Volts or less. It is non-shielded and has a temperature rating of -40 to 194 deg F. Insulator is designed for 3-Inch connectors. It offers tape shielding, wire shielding and unisheilding. Insulator has a relaxed tube length of 8 inches. Connector insulator is RoHS compliant and meets ANSI C1191.1 standards.
Brand | 3M |
Catalog Description | 3MÖ Cold Shrink Connector Insulators 8420 and 8430 Series are designed using 3MÆs proprietary cold shrink delivery system. Products are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core (unwinding) after positioning the splice allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated EPDM material promotes a permanent, durable environmental seal and insulation, with a typical operating temperature range from -40û194¦F (-40û90¦C).The 8420 insulator meets requirements of ANSI C119-1 and Western Underground Guide 2.14 for secondary splices rated up to 1 kV.Applications: Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 V. Good for repairs and environmental sealing for communication and other non-electrical applications.Important: Use insulation jacket or connector O.D. for final ordering criteria.* Mastic pads included for cable O.D. build-up. ** Kit contains adapters. *** These sizes are listed for availability only and are not designed to be usedas primary insulation. These tubes are for conduit sealing and breakouts. ****Maximum connector length: 5.625Point of Purchase packaging designated by P. Example: 8423-6P |
GTIN | 00054007423904 |
Height | 5.7000 |
Height Unit | IN |
Item Status | A |
Length | 9.3000 |
Length UOM | IN |
Mfr. # | 8424-8 |
Type | Cold Shrink Splice |
UNSPSC | 39121721 |
Width | 7.8000 |
Width UOM | IN |