Provide easy installation for a broad spectrum of indoor and outdoor applications
The cold shrink QT-II termination is based on specially formulated, track-resistant silicone rubber insulators with built-in Hi-K stress relief
The insulators are pre-stretched around a spiral -wound, plastic core
When the terminator is slipped over a properly prepared cable and the core is removed, the terminator immediately shrinks to the cable's dimensions
The result is a void-free, flexible seal without special tools or torches
110 Kilo-Volt basic insulation level
100%, 133% insulation level
Detailed Description:
3M 4-Skirt outdoor cold shrink QT-II termination kit includes one Hi-k silicone rubber termination, two Scotch ® silicone rubber tape 70 strips, two mastic seal strips, one pack of silicone grease and one instruction sheet. Kit is ideal for 15-kilo-Volts jacketed concentric neutral cable with 3/0 AWG - 350 kcmil conductor sizes. It is also suitable for cables with 0.84 - 1.38-Inch outer diameter insulation and 1.19 - 1.72-Inch outer diameter jacket.
Kit provides easy installation for wide range of indoor and outdoor applications. Kit consists of Hi-K stress control tube that is insulated with molded silicone skirted insulator. Kit includes adequate material required for one termination. It has maximum installed length of 10-Inch.
Application | Outdoor |
Brand | 3M |
Catalog Description | 3MÖ Cold Shrink QT II 5640 & 5650 Series Termination Kit includes a 4 skirt, 1 piece termination. It ensures a pliable, tight seal for jacketed concentric neutral power cables. The conjunction of high dielectric constant material and silicone rubber insulation allows the termination to withstand voltages up to 15kV. |
GTIN | 00054007119708 |
Height | 3.5000 |
Height Unit | IN |
Item Status | A |
Length | 14.8000 |
Length UOM | IN |
Mfr. # | 5642 |
Standard | IEEE |
Type | QT-II |
UNSPSC | 26121648 |
Width | 3.7000 |
Width UOM | IN |